Item | Washdown Motor |
Motor Design | 3-Phase |
Phase | Three |
HP | 1/2 |
RPM Range | 1,701-1,800 |
Voltage | 230/460V AC |
Frame | 56 |
Motor Frame Material | Epoxy Coated Rolled Steel |
Motor Thermal Protection | None |
Motor Enclosure Design | Totally Enclosed Fan-Cooled |
NEMA Design | B |
Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 230/460V AC |
Hz | 60/50 Hz |
Duty | Continuous |
Motor Mounting Type | Rigid Base |
Length Less Shaft | 11 1/2 in |
Shaft Material | 303 Stainless Steel |
Motor Shaft Rotation | CW/CCW |
Full Load Amps | 1.6./0.8 A |
Ins. Class | F |
Includes | Side-Mounted Conduit Box |
Frame Material | Epoxy Coated |
Motor Shaft Design | Keyed |
Shaft Length | 1 7/8 in |
Application | High Humidity, Wet Environments and Areas Where Motor is Occasionally Exposed to High Pressure Washdowns |
Conduit Box | Cast Aluminum with Buna N Gasketed Cover |
Endshields | Cast Aluminum |
Motor Mounting Position | Horizontal |
Nameplate RPM | 1,750 |
CC Number | CC030A |
Motor Bearings | Ball |
Motor Service Factor | 1.15 |
Max. Ambient Temp. | 40 Degrees C |
Standards | CSA Certified (258525), UL Recognized (E47479), USDA Approved |
Motor Application | Washdown |
Nominal Efficiency | 78.5 % |
Drain Plugs | (4) Each End, (2) In Conduit Box |
Inverter Rated | Yes |
Body Dia. | 6.5 in |
Overall Length | 13 7/16 in |
Shaft Dia. | 5/8 in |
Duty Cycle | Continuous |
Endshield Material | Cast Aluminum |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Washdown Motor, 3 Ph, TEFC, 1/2 HP, 1725 rpm, DAYTON, Mfr# 2DAK7
$319,99
Free shipping will be applied on orders over $50
Washdown Motor, Three Phase, Motor Design 3-Phase, 1/2 HP, Nameplate RPM 1,750, Voltage 230/460V AC, Full Load Amps 1.6./0.8 A, 56 Frame, 60/50 Hz Hz, Motor Service Factor 1.15, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, NEMA Design B, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal, Motor Frame Material Epoxy Coated Rolled Steel
9999 in stock
Must order in multiples of 1
Subtotal:
$691.60
You must be logged in to post a review.
Reviews
There are no reviews yet.