| Item | Washdown Motor |
| Motor Design | 3-Phase |
| Phase | Three |
| HP | 1 |
| RPM Range | 1,701-1,800 |
| Voltage | 230/460V AC |
| Frame | 56C |
| Motor Frame Material | Rolled Steel |
| Motor Thermal Protection | None |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Hz | 60/50 Hz |
| Includes | Shaft Key |
| Motor Mounting Position | Horizontal |
| Motor Shaft Design | Keyed |
| Standards | CSA (258525). USDA Approved paint finish, UL (E47479) |
| Nominal Efficiency | 85.5 % |
| Max. Ambient Temp. | 40 Degrees C |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 230/460V AC |
| Shaft Dia. | 5/8 in |
| Nameplate RPM | 1,750 |
| Overall Length | 12 1/4 in |
| Frame Material | Rolled steel |
| Motor Bearings | Ball |
| Application | Washguard |
| Duty | Continuous |
| Endshields | Cast Aluminum |
| Shaft Material | Stainless Steel |
| Drain Plugs | (2) Drain Plugs In Conduit Box, (4) Drain Plugs In Each End Bells |
| Full Load Amps | 3.1/1.5 A |
| Body Dia. | 6.5 in |
| Length Less Shaft | 10 3/16 in |
| CC Number | CC030A |
| Motor Shaft Rotation | CW/CCW |
| Motor Service Factor | 1.15 |
| Inverter Rated | No |
| Conduit Box | Oversize Cast Aluminum with Nitrile Gasket |
| NEMA Design | B |
| Motor Application | Washdown |
| Shaft Length | 1 7/8 in |
| Motor Mounting Type | Face |
| Endshield Material | Cast Aluminum |
| Duty Cycle | Continuous |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Washdown Motor, TENV, 1 HP, 1750 rpm, 56C, DAYTON, Mfr# 48ZJ94
$810.91
Free shipping will be applied on orders over $50
Washdown Motor, Three Phase, Motor Design 3-Phase, 1 HP, Nameplate RPM 1,750, Voltage 230/460V AC, Full Load Amps 3.1/1.5 A, 56C Frame, 60/50 Hz Hz, Motor Service Factor 1.15, Motor Thermal Protection None, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, NEMA Design B, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face, Motor Mounting Position Horizontal, Motor Frame Material Rolled Steel, Endshield Material Cast Aluminum
9999 in stock
Must order in multiples of 1
Subtotal:
$810.91
You must be logged in to post a review.
Reviews
There are no reviews yet.