Carbide Turning Insert, DNMG433/DNMG150412, Garant, Mfr#: 250869 HB7120-1
$17.35
Garant
882 products
Showing 24 of 882 products
3/8 inch Drive Socket, 6 pt, 7/16 inch, Garant, Mfr#: 637232 7/16
$4.79
HSS-E-PM Through Hole Machine Tap, 24X1.5 Tap Thread Size, AlTiX Coated, Garant, Mfr#: 132905 24X1,5
$240.55
Easyfix hose support- Tube length: 300mm, Garant, Mfr#: 955755 300
$52.95
Solid Carbide Drill, 20 mm Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant, Garant, Mfr#: 123008 20
$1,225.99
Solid Carbide Drill, 4.3 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank, Garant, Mfr#: 122659 4,3
$99.69
Solid Carbide Drill, 4.9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant, Garant, Mfr#: 123008 4,9
$278.99
Solid Carbide Drill, 8.1 mm Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant, Garant, Mfr#: 123008 8,1
$377.21
3/8 inch Drive Socket, 12 pt, 3/4 inch, Garant, Mfr#: 637032 3/4
$5.89
Hacksaw frame with bimetal blade 18 - 32 TPI progressive, Garant, Mfr#: 580400
$28.75
3/8 inch Drive Socket, 6 pt, 7/8 inch, Garant, Mfr#: 637232 7/8
$6.49
1/2 inch Drive Bit Socket, 9/16 inch, Garant, Mfr#: 643232 9/16
$15.45
Torque Screwdriver, Fixed Torque: 5.7Nm, Garant, Mfr#: 211750 5,7
$18.15
Open ended wrench / ratchet ring wrench set- imperial- Width across flats: 11/16in, Garant, Mfr#: 614825 11/16
$39.65
Carbide Turning Insert, DNMG432/DNMG150408, Garant, Mfr#: 250672 HB7035-1
$17.35
Set of holders plastic hooks- Type: 1, Garant, Mfr#: 955860 1
$250.99
CAR SHOVEL/BRUSH TELESCP, Garant, Mfr#: DUOTCS26SB
$39.59
Solid Carbide Drill, 3.7 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank, Garant, Mfr#: 122659 3,7
$99.69
Easyfix holder for compressed air blow gun- Type: 1, Garant, Mfr#: 955750 1
$28.15
Solid Carbide Drill, 9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant, Garant, Mfr#: 123008 9
$385.99
3/8 inch Drive Socket, 6 pt, 3/8 inch, Garant, Mfr#: 637232 3/8
$5.29
Solid Carbide Drill, 6 mm Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant, Garant, Mfr#: 123008 6
$278.99
Solid Carbide Drill, 1/4 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank, Garant, Mfr#: 122659 1/4
$127.99
Solid Carbide Drill, 3.4 mm Dia, 135 Deg Point Angle, TiAlN Coated, Plain Shank, Through-Coolant, Garant, Mfr#: 123212 3,4
$269.73