| Item | Submersible Deep Well Pump |
| HP | 1/2 hp |
| Number of Wires | 3 |
| Amps | 6 A |
| Rated Voltage | 230V AC |
| Phase - Pumps | 1 |
| Nominal Flow Rate | 7 gpm |
| Number of Stages | 10 |
| Discharge Head Material | Thermoplastic |
| Flow Rate @ 100 Ft. @ 40 PSI | 8.5 gpm |
| Flow Rate @ 100 Ft. @ 50 PSI | 7.5 gpm |
| GPM of Water @ 100 Ft @ 30, 50 PSI | 8, 6 |
| Length (In.) | 27-1/2 |
| Type | Deep Well Submersible |
| GPM of Water @ 80 Ft @ 30, 50 PSI | 7, 6 |
| Compliance | CSA/CUS |
| Pump Material | Thermoplastic |
| Max. Head (Ft.) | 310 |
| Seal Type | Lip Seal |
| GPM @ Vertical Depth to Water @ 100 Ft @ 50 PSI | 6 |
| Height (In.) | 3-3/4 |
| GPM @ Vertical Depth to Water @ 20 Ft @ 30 PSI | 11 |
| Built-In Check Valve | Yes |
| Pump Bearings | Sleeve |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Width (In.) | 3-3/4 |
| Shut Off (PSI) | 134 |
| GPM of Water @ 40 Ft @ 30, 50 PSI | 8, 7 |
| GPM @ Vertical Depth to Water @ 20 Ft @ 50 PSI | 9 |
| Impeller Material | Noryl |
| Control Box Required | Yes |
| GPM of Water @ 175 Ft @ 30, 50 PSI | 5, 2 |
| GPM of Water @ 150 Ft @ 30, 50 PSI | 6, 3 |
| Well Capacity | Average |
| Tank PSI | 20, 30, 40, 50, 60 |
| Max. Operating Temp. (F) | 86 |
| GPM @ Vertical Depth to Water @ 100 Ft @ 30 PSI | 8 |
| Discharge Port (In.) | 1-1/4 |
| Voltage | 230 |
| GPM @ Vertical Depth to Water @ 200 Ft @ 30 PSI | 12 |
| Shaft Material | Stainless Steel |
| Flow Ranges (GPM) | 2 - 13 |
| GPM of Water @ 20 Ft @ 30, 50 PSI | 11, 9 |
| GPM of Water @ 60 Ft @ 30, 50 PSI | 7, 6 |
| Amps AC | 6.0 |
| GPM | 7 |
| SF Amps | 6.0 |
| GPM of Water @ 125 Ft @ 30, 50 PSI | 7, 4 |
| Phase | 1 |
| Stages | 10 |
| Screen Material | Noryl |
| Pump-Motor Shell | Stainless Steel |
| Flow Rate @ 150 Ft. @ 40 PSI | 6.2 gpm |
| Max. Operating Temp. | 86 Degrees F |
| Flow Rate @ 150 Ft. @ 50 PSI | 4.7 gpm |
| Max. Head | 310 ft |
| Discharge Dia. | 1 1/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Submersible Deep Well Pump, 1/2 hp, 230V AC, 3 Wires, 6.0 A, 10 Stages, 7 gpm, FLINT & WALLING, Mfr# 4F07P05301S
$757,80
Free shipping will be applied on orders over $50
Submersible Deep Well Pump, HP 1/2 hp, Rated Voltage 230V AC, Amps 6 A, Phase - Pumps 1, Number of Stages 10, Number of Wires 3, Discharge Head Material Thermoplastic, Impeller Material Noryl, Shaft Material Stainless Steel, Nominal Flow Rate 7 gpm, Flow Rate @ 100 Ft. @ 40 PSI 8.5 gpm, Flow Rate @ 100 Ft. @ 50 PSI 7.5 gpm, Flow Rate @ 150 Ft. @ 40 PSI 6.2 gpm, Flow Rate @ 150 Ft. @ 50 PSI 4.7 gpm, Max. Head 310 ft, Discharge Dia. 1 1/4 in, Max. Operating Temp. 86 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$757.8
You must be logged in to post a review.
Reviews
There are no reviews yet.