| Property | Value |
|---|---|
| Item | Magnetic Drive Pump |
| HP | 1/2 hp |
| Voltage | 230 |
| Inlet | 1 in FNPT |
| Outlet | 3/4 in MNPT |
| Max. Head | 29 ft |
| Operating Pressure | 12.6 psi |
| Housing Material | Polypropylene |
| Length | 14 1/16 in |
| Width | 7 5/8 in |
| Application | Acids, Caustics, DI-Water, Plating Solutions, Sodium Hydroxide |
| GPM of Water @ 6 Ft. of Head | 30 gpm |
| GPM of Water @ 24 Ft. of Head | 17 gpm |
| Max. Specific Gravity | 1.8 |
| GPM of Water @ 15 Ft. of Head | 25 gpm |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Gasket Material | EPDM |
| Design | Centrifugal |
| Series | DB5.5 |
| Height | 7 7/16 in |
| Impeller Material | Polypropylene |
| Full Load Amps | 2.4 |
| Motor Type | Permanent Split Capacitor |
| GPM of Water @ 18 Ft. of Head | 22 gpm |
| Mounting | Close Coupled |
| Max. Viscosity | 150 CPS |
| GPM of Water @ 9 Ft. of Head | 28 gpm |
| Bearing Type | Radial, Thrust |
| GPM of Water @ 3 Ft. of Head | 30 gpm |
| Discharge Pipe Size | 3/4 in |
| Viscosity (Maximum) | 150 cps |
| Intake Pipe Type | FNPT |
| Flow Rate @ 3 ft of Head (Maximum) | 30 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 25 gpm |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Manufacturers Warranty Length | 5 yr |
| Operating Pressure (Maximum) | 12.6 psi |
| Flow Rate @ 18 ft of Head (Maximum) | 22 gpm |
| Nameplate Voltage | 230V AC |
| Horsepower (Maximum) | 1/2 hp |
| Feet of Head (Maximum) | 31 ft |
| Full Load Current | 2.4 A |
| Flow Rate @ 9 ft of Head (Maximum) | 28 gpm |
| Specific Gravity (Maximum) | 1.8 |
| Motor Mounting Type | Horizontal |
| Priming | Manual |
| Motor Speed (Maximum) | 3,450 RPM |
| Phase | Single |
| Media Temperature (Maximum) | 180 Degrees F |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Discharge Pipe Type | MNPT |
| Overall Width | 7.6 in |
| Mounting Orientation | Horizontal |
| Flow Rate @ 6 ft of Head (Maximum) | 30 gpm |
| Overall Height | 7.4 in |
| Chemical Compatibility | Deionized Water |
| Overall Length | 14.1 in |
| Intake Pipe Size | 1 in |
| Flow Rate @ 24 ft of Head (Maximum) | 17 gpm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
1/2 HP Polypropylene Magnetic Drive Pump 230V 1" FNPT, Finish Thompson, Mfr#: DB5.5P-E-M617
$618.99
Free shipping will be applied on orders over $50
Magnetic Drive Pump, Chemical Compatibility Deionized Water, Discharge Pipe Size 3/4 in, Discharge Pipe Type MNPT, Feet of Head (Maximum) 31 ft, Flow Rate @ 3 ft of Head (Maximum) 30 gpm, Flow Rate @ 6 ft of Head (Maximum) 30 gpm, Flow Rate @ 9 ft of Head (Maximum) 28 gpm, Flow Rate @ 15 ft of Head (Maximum) 25 gpm, Flow Rate @ 24 ft of Head (Maximum) 17 gpm, Flow Rate @ 50 ft of Head (Maximum) Not Applicable, Horsepower (Maximum) 1/2 hp, Intake Pipe Size 1 in, Intake Pipe Type FNPT
9999 in stock
Subtotal:
$618.99
You must be logged in to post a review.
Reviews
There are no reviews yet.