| Property | Value |
|---|---|
| Item | Signal Generator |
| Type | Pulse |
| Other Waveform Range | 0.1 Hz to 50 MHz (Pulse) |
| Includes | Power Cord, RS-232 Cable |
| Impedance (Ohms) | 50 Ohms typical |
| Display | Graphical LCD |
| Frequency Dial Accuracy (%) | 0-100 |
| Output Amplitude | 0.1 V to 10 Vp-p into 50 ohm Load (20 Vp-p Max into Open Circuit) |
| Manufacturers Warranty Length | 3 yr |
| Power Source | Line Input: 100 V AC, 240 V AC +/-10%, 50 VA max |
| Interface | RS-232 and GPIB |
| Special Features | Dual Channel Operation,Flexible Trigger Modes,Gated Burst and External Width,Predefined amplitude levels for ECL, TTL, and CMOS signals,Programmable via GPIB and RS-232,SCPI compatible |
| Output Attenuation | Not Applicable |
| Product Type | Pulse Signal Generator |
| Arbitrary Wave Frequency - Minimum | Not Applicable |
| Sweep Time - Maximum | Not Applicable |
| Triangle Wave Frequency - Minimum | Not Applicable |
| Number of Display Digits | 6 |
| Single Pulse Wave Frequency - Minimum | 0.1 Hz |
| Single Pulse Wave Frequency - Maximum | 50 MHz |
| Arbitrary Wave Frequency - Maximum | Not Applicable |
| Sine Wave Harmonic Distortion | Less Than 4% @ 1 KHz |
| Sine Wave Frequency - Minimum | Not Applicable |
| Waveforms Generated | Pulse |
| Square Wave Rise/Fall Time | 6 ns to 100 ms |
| Calibration Certificate Type | NIST |
| Sweep Time - Minimum | Not Applicable |
| Wave Frequency Accuracy | +/-0.01% |
| Sine Wave Frequency - Maximum | Not Applicable |
| Square Wave Frequency - Maximum | Not Applicable |
| Square Wave Frequency - Minimum | Not Applicable |
| Triangle Wave Frequency - Maximum | Not Applicable |
| Digital Display Screen Type | LCD |
| Number of Channels | 2 |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |
50 MHz Dual Channel Pulse Generator, B&K Precision, Mfr#: 4034
$8819.99
Free shipping will be applied on orders over $50
Signal Generator, Pulse, Other Waveform Range 0.1 Hz to 50 MHz (Pulse), Output Amplitude 0.1 V to 10 Vp-p into 50 ohm Load (20 Vp-p Max into Open Circuit), Impedance (Ohms) 50 Ohms typical, Output Attenuation Not Applicable, Frequency Dial Accuracy ( Percent) 0-100, Display Graphical LCD, Power Source Line Input: 100 V AC, 240 V AC +/-10 Percent, 50 VA max
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.