| Property | Value |
|---|---|
| Item | Pressure Washer Motor,5 HP,Single Phase |
| Motor Enclosure Design | Open Dripproof |
| Motor Mounting Type | Rigid Base |
| HP | 5 |
| Voltage | 208-230V AC |
| Frame | 184TC |
| Motor Thermal Protection | Manual |
| Motor Service Factor | 1.15 |
| Voltage Compatibility | 208-230V AC |
| Motor Application | Pressure Washer |
| Motor Sub Application | Not Applicable |
| Motor Design | Capacitor-Start |
| Nameplate RPM | 1,740 |
| Motor Shaft Rotation | CCW |
| Motor Mounting Position | Horizontal |
| Motor Frame Material | Rolled Steel |
| Motor Shaft Design | Keyed |
| Standards | CSA, UL Listed |
| Includes | Not Applicable |
| Manufacturers Warranty Length | Not Applicable |
| Full Load Amps | 23.0 to 21.0 A |
| Length Less Shaft | 11 15/16 in |
| No. of Speeds | 1 |
| Hz | 60 |
| Lead Length | Not Applicable |
| Phase | Single |
| Max. Ambient Temp. | 40 Degrees C |
| Body Dia. | 8.4 in |
| Shaft Dia. | 1 1/8 in |
| Ring to Ring Center | Not Applicable |
| Motor Bearings | Ball |
| Resilient Ring Dia. | Not Applicable |
| Shaft Length | 2 3/4 in |
| Ins. Class | F |
| Bolt Circle Dia. | 7 1/4 in |
| Inverter Rated | Not Applicable |
| Finish | Enamel |
| Nominal Efficiency | 83 % |
| NEMA Design | B |
| Shaft Material | AISI 1045 Steel |
| CC Number | Not Applicable |
| Overall Length | 14 11/16 in |
| Conduit Box Position | F1 |
| Usable @ 208V | Yes |
| Bearing Protection | Double Shielded |
| Weight | 80 lb |
| Duty Cycle | Continuous |
| Overload Relay Amp Setting | Not Applicable |
| Max. SF Amps | Not Applicable |
| Overload Relay Required | Not Applicable |
| Height | 11 5/16 in |
| Number of Wires | Not Applicable |
| Thrust Rating | Not Applicable |
| For Pump Number | Not Applicable |
| Service Factor @ 50Hz | Not Applicable |
| Stator Type | Not Applicable |
| RPM @ 50Hz | Not Applicable |
| Diaphragm Type | Not Applicable |
| Overload Relay Max. Amp Setting | Not Applicable |
| Replacement For | Not Applicable |
| Voltage @ 50Hz | Not Applicable |
| Usable @ 200V | Not Applicable |
| Part Winding Start Capable | Not Applicable |
| Conduit Box Location | Not Applicable |
| Regreasable Bearings | Not Applicable |
| HP @ 50Hz | Not Applicable |
| Starter Required | Not Applicable |
| Full Load Amps @ 50Hz | Not Applicable |
| Inverter Rating | None |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
5Hp Motor 230 Volts 1 Ph 1740 Rpm Frame, Leeson, Mfr#: 131630.00
$868.99
Free shipping will be applied on orders over $50
Pressure Washer Motor,5 HP,Single Phase, Bearing Protection Double Shielded, Body Dia. 8.4 in, Bolt Circle Dia. 7 1/4 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position F1, Diaphragm Type Not Applicable, Duty Cycle Continuous, Finish Enamel, For Pump Number Not Applicable, Frame 184TC, Hz 60, Full Load Amps 23.0 to 21.0 A, Full Load Amps @ 50Hz Not Applicable, Height 11 5/16 in, HP 5, HP @ 50Hz Not Applicable, Includes Not Applicable, Ins. Class F
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.