62 Series Marine Carbon Monoxide, Flush Mount, White, 12V w/Trim Ring, Safe-T-Alert, Mfr#: 62-542-TR-WT-M

62 Series Marine Carbon Monoxide – Flush Mount – White – 12V with Trim Ring Features: This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. NMMA Listed Component. Space Saving design – works in harsh marine environments. Works in extreme temperatures. – Only marine CO alarm listed to operational temperatures of -40 degF to 158 degF. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor. No False Alarms – due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available. Low Current Draw37 mA. An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. – With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO. End of Life Signal – alerts boater to replace the alarm after 5 years of service. Memory Scan. – Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain. Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 13.8 VDC Operational Range: 13.8 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40 degF to +158 degF Case Size: 4.5"W x 3.25"H x 1.25"D