Item | AC Gearmotor |
Gearmotor Voltage | 115V AC |
Gearmotor Phase | 1 |
Gearmotor Type | AC Gearmotor |
Max. Torque | 45 in-lb |
Gearmotor Shaft Type | Single |
Gearmotor Shaft Orientation | Parallel |
Nameplate RPM | 25 RPM |
Gearmotor Enclosure | Open |
Gearmotor Rotation | CW |
Gearmotor Brake Type | None |
Length Less Shaft | 3.38 in |
Gearmotor Mounting Position | All Angle |
Full Load Amps | 1.30 |
Standards | UL Recognized |
Input HP | 1/50 hp |
Shaft Dia. (Dimension U) | 3/8 in |
Gear Type | Spur |
Rotation | CW |
Finish | Unpainted |
Housing | Die Cast Zinc |
Gears | Spur |
Insulation Class | A |
Number of Brake Discs Required | 0 |
Service Factor | 1 |
Mounting | All Position |
Shaft Length (Dimension V) | 1.3125 in |
Starting Torque | 40 in-lb |
Gear Case Material | Die Cast Zinc |
Hz | 60/50 Hz |
Shaft | Single Output |
Max. Ambient Temp. | 40 Degrees C |
Brake | None |
Motor Shaft Design | Flat |
Gear Material | Sintered Steel |
Application | Agriculture, Amusement Devices, Controls, Conveyors, DVD Kiosks, Food and Restaurant Equipment, Ice Dispensing, Industrial Machinery, Ingredient Motors, Mail Sorting, Packaging, Pellet and Corn Stoves, Power Transmission, Printing Press, Pumps, Security Systems, Ticket Dispensing, Valve Actuators, Vending, Water Softeners, X-Ray Equipment |
Phase | Single |
Gear Ratio | 145:1 |
Motor Type | Shaded Pole |
Voltage | 115 |
Enclosure | Open |
No Load RPM | 26 RPM |
RPM Range | 16 to 30 |
Reversible Shaft Output | No |
Shaft Orientation | Parallel |
Bearings | Sintered Bronze Sleeve |
Capacitor Required | No |
Lubrication | Grease Filled |
Thermal Protection | Auto |
RPM @ 50 Hz | 20 RPM |
Overall Length | 10.87 in |
Overhung Load | 30 lb |
Housing Material | Die Cast Zinc |
Overall Width | 6.79 in |
Overhung Load Capacity | 30 ft-lb |
Mount Type | Any Position |
Frequency | 50 Hz, 60 Hz |
Motor Insulation Class | A |
Mount Hole Center-to-Center Length | 4.31 in |
Maximum Torque | 45 in-lb |
Full Load Current | 1.3 A |
Output Shaft Height | 1.19 in |
Brake Type | None |
Housing Material Finish | Unpainted |
Input Horsepower | 0.02 hp |
Mount Hole Center-to-Center Width | 2.38 in |
No Load Speed | 26 RPM |
Overall Height | 5.69 in |
Output Shaft Diameter | 3/8 in |
Nameplate Speed | 25 RPM |
Mounting Orientation | Any Angle |
Maximum Ambient Temperature | 104 Degrees F |
Operating Voltage | 115V AC |
Motor Enclosure | Open Air-Over |
Number of Output Shafts | 1 |
Bearing Type | Sintered Bronze Sleeve |
Output Shaft Length | 1 5/16 in |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
AC Gearmotor, 45.0 in-lb Max. Torque, 25 RPM Nameplate RPM, 115V AC Voltage, 1 Phase, DAYTON, Mfr# 52JE14
$90,15
-3% / ea
with subscription
Free shipping will be applied on orders over $50
AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 25 RPM, Maximum Torque 45 in-lb, Overhung Load Capacity 30 ft-lb, Rotation CW, Output Shaft Height 1.19 in, Mounting Orientation Any Angle, Operating Voltage 115V AC, Gear Ratio 145:1, Brake Type None, Shaft Orientation Parallel, Motor Insulation Class A
9999 in stock
Must order in multiples of 1
Subtotal:
$90.15
You must be logged in to post a review.
Reviews
There are no reviews yet.