| Industry Chain Size | 60 |
| Number of Teeth - Sprockets | 13 |
| Outside Dia. | 3.52 in |
| Bore Dia. - Sprockets | 11/16 in |
| Material - Sprockets | Glass-Reinforced Nylon |
| Lubrication | Mobil Polyrex EM, NLGI No. 2 |
| Number of Teeth | 13 |
| Bore Dia. (In.) | 0.510 to 0.520 |
| Outside Dia. (In.) | 3.52 |
| ANSI Chain Size | 60 |
| Tightener Shaft Required | No |
| Characteristics | Lightweight and Quiet |
| Item - Idler Sprockets | Idler Sprocket |
| Bearings | Insertion Molded ABEC-1 High Precision |
| Material | Fiberglass-Reinforced Nylon |
| Length through Bore (In.) | 1 in |
| Item | Composite Idler Sprocket with Bearing |
| Teeth Material | Glass-Reinforced Nylon |
| Length through Bore | 1 in |
| Chain Number | 60 |
| Pitch Diameter | 3.14 in |
| Outside Diameter | 3.52 in |
| Bearing Type | Ball |
| Resistance Properties | Corrosion Resistant, Wear Resistant |
| Hub Diameter | 1 3/4 in |
| For Chain Number | 60 |
| Minimum Operating Temperature | 32 Degrees F |
| Bearing Material | Chrome Steel |
| Bore Diameter | 17 mm |
| Maximum Radial Load at Speed | 1026 lb @ 300 rpm, 1175 lb @ 200 rpm, 1480 lb @ 100 rpm, 2141 lb @33 rpm, 402 lb @ 5000 rpm, 449 lb @ 3600 rpm, 507 lb @ 2500 rpm, 565 lb @ 1800 rpm, 601 lb @ 1500 rpm, 687 lb @ 1000 rpm, 866 lb @ 500 rpm |
| Sprocket Material | Fiberglass-Reinforced Nylon |
| Bearing Number | 6203-2RS |
| Sprocket Width | 0.67 in |
| Tooth Width | 0.449 in |
| Material Grade | 6/6 |
| For Use With | Sprocket Assemblies, T-Max Tensioner |
| Maximum Operating Temperature | 225 Degrees F |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Idler, Sprocket, 60 ANSI, FENNER DRIVES, Mfr# CS6002/CB0004
$26,89
Free shipping will be applied on orders over $50
Composite Idler Sprocket with Bearing, Bore Diameter 17 mm, Chain Number 60, Sprocket Material Fiberglass-Reinforced Nylon, Number of Teeth 13, Outside Diameter 3.52 in, Bearing Material Chrome Steel, Bearing Number 6203-2RS, Bearing Type Ball, For Use With Sprocket Assemblies, T-Max Tensioner, Hub Diameter 1 3/4 in, Length through Bore 1 in, Lubrication Mobil Polyrex EM, NLGI No. 2, Material Grade 6/6, Maximum Operating Temperature 225 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$26.89
You must be logged in to post a review.
Reviews
There are no reviews yet.