Item | Air Gearmotor |
Motor Design | Not Applicable |
Running Torque @ Max. Pressure | 49 in-lb |
Max. Air Flow | 21 cfm |
HP | 0.32 hp |
No Load RPM | 400 RPM |
Shaft Dia. | 1/2 in |
Mounting | Face |
Port Size | 1/8 in NPT |
Rotation | CW/CCW |
Overall Length | 7 3/8 in |
Shaft Length | 1 3/8 in |
Housing Material | Aluminum |
Max. Air Pressure | 60 psi |
Overall Width | 2 15/16 in |
RPM @ Max. Torque | 40 RPM |
Keyway Length | Not Applicable |
Operating Temp. Range | 0 Degrees to 250 Degrees F |
Overall Height | 2 15/16 in |
Finish | Gray |
Gear Ratio | 15:1 |
Length Less Shaft | 6 in |
Mount Type | Face |
Standards | Not Applicable |
Includes | Muffler |
Outside Diameter | 3 in |
Weight | 3.97 lb |
Maximum Torque | 49 in-lb |
Output Power @ 50% Maximum Speed | Not Applicable |
Speed @ Maximum Torque | 40 RPM |
Keyway Width | Not Applicable |
Air Inlet Center to Center Distance | 1 3/4 in |
AGMA Gear Class | Not Applicable |
Shaft Material | Steel |
Minimum Operating Pressure | 20 psi |
IP Rating | Not Applicable |
Inlet Gender | Female |
Housing Material Finish | Painted |
Shaft Diameter | 1/2 in |
Motor Frame Material | Cast Iron |
Shaft Material Grade | 42CrMo |
Minimum Ambient Temperature | 0 Degrees F |
No Load Speed | 400 RPM |
Output Location | Not Applicable |
Air Consumption | 21 cfm |
Air Inlet Type | NPT |
External Hardware Material | Not Applicable |
Mount Hole Center-to-Center Length | Not Applicable |
Starting Torque | 5.24 ft-lb |
Brake Type | Not Applicable |
Maximum Operating Pressure | 60 psi |
Series | Not Applicable |
Inlet Size | 1/8 in |
Mount Hole Center-to-Center Width | Not Applicable |
Output Power @ Maximum Speed | 0.32 hp |
Maximum Ambient Temperature | 250 Degrees F |
Keyway Depth | Not Applicable |
Output Power @ 25% Maximum Speed | Not Applicable |
Keyway Type | Not Applicable |
Shaft Orientation | Parallel |
Gear Type | Not Applicable |
Gear Material | Steel |
Number of Output Shafts | 1 |
Seal Material | Nitrile Rubber |
Manufacturers Warranty Length | 1 yr |
Bearing Protection | Not Applicable |
Gear Material Grade | 42CrMo |
Minimum Flow Rate | 4.22 cfm |
Nameplate Speed | 30 RPM |
Housing Material Grade | 42CrMo |
Mounting Orientation | Any Angle |
System of Measurement | Inch |
Maximum Flow Rate | 21 cfm |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Air Gearmotor, 0.32 HP, 21 cfm, 400 rpm, SPEEDAIRE, Mfr# 22UX55
$362,99
-$10.89 / ea
with subscription
Free shipping will be applied on orders over $50
Air Gearmotor, Output Power @ Maximum Speed 0.32 hp, Maximum Torque 49 in-lb, No Load Speed 400 RPM, Maximum Flow Rate 21 cfm, Shaft Diameter 1/2 in, Shaft Length 1 3/8 in, Mount Type Face, Inlet Size 1/8 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Aluminum, Gear Ratio 15:1, Air Consumption 21 cfm, Housing Material Finish Painted, AGMA Gear Class Not Applicable, Air Inlet Center to Center Distance 1 3/4 in, Inlet Gender Female, Output Power @ 25 Percent Maximum Speed Not Applicable
9999 in stock
Must order in multiples of 1
Subtotal:
$362.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.