Item | Air Motor |
Motor Design | Not Applicable |
Running Torque @ Max. Pressure | 290 in-lb |
Max. Air Flow | 275 cfm |
HP | 9.5 hp |
No Load RPM | 2,000 RPM |
Shaft Dia. | 7/8 in |
Mounting | Foot and Flange |
Port Size | 1-1/4 in NPT |
Rotation | CW/CCW |
Overall Length | 13 5/8 in |
RPM @ Max. Torque | 500 RPM |
Overall Width | 8 in |
Operating Temp. Range | 0 Degrees to 250 Degrees F |
Max. Air Pressure | 100 psi |
Overall Height | 7 1/4 in |
Finish | Gray |
Keyway Length | 1 3/8 in |
Shaft Length | 2 1/8 in |
Housing Material | Cast Iron |
Length Less Shaft | Not Applicable |
Standards | Not Applicable |
Mount Type | Flange, Foot |
Includes | Muffler |
Weight | 72.32 lb |
Outside Diameter | 7 1/4 in |
Maximum Flow Rate | 275 cfm |
Shaft Material | Steel |
Keyway Width | 1/4 in |
Shaft Material Grade | 40Cr |
Maximum Torque | 290 in-lb |
Air Inlet Type | NPT |
Output Power @ Maximum Speed | 9.5 hp |
Shaft Orientation | Inline |
Bearing Protection | Not Applicable |
Output Power @ 25% Maximum Speed | Not Applicable |
Keyway Type | Flat Key |
Shaft Diameter | 7/8 in |
Housing Material Finish | Painted |
Nameplate Speed | 300 RPM |
Minimum Flow Rate | 33.76 cfm |
Starting Torque | Not Applicable |
No Load Speed | 2,000 RPM |
Series | Not Applicable |
Output Power @ 50% Maximum Speed | Not Applicable |
Maximum Operating Pressure | 100 psi |
Inlet Size | 1 1/4 in |
Inlet Gender | Female |
Motor Frame Material | Cast Iron |
Keyway Depth | 1/8 in |
Minimum Operating Pressure | 1.4 bar |
Maximum Ambient Temperature | 250 Degrees F |
Air Inlet Center to Center Distance | 4 1/4 in |
Manufacturers Warranty Length | 1 yr |
Mount Hole Center-to-Center Width | Not Applicable |
Mounting Orientation | Any Angle |
Speed @ Maximum Torque | 500 RPM |
Housing Material Grade | Not Applicable |
Minimum Ambient Temperature | 0 Degrees F |
Mount Hole Center-to-Center Length | Not Applicable |
Air Consumption | 275 cfm |
System of Measurement | Inch |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Air Motor, 9.5 HP, 280 cfm, 2000 rpm, SPEEDAIRE, Mfr# 22UX53
$757,99
Free shipping will be applied on orders over $50
Air Motor, Output Power @ Maximum Speed 9.5 hp, Maximum Torque 290 in-lb, No Load Speed 2,000 RPM, Maximum Flow Rate 275 cfm, Shaft Diameter 7/8 in, Shaft Length 2 1/8 in, Mount Type Flange, Foot, Inlet Size 1 1/4 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Cast Iron, Shaft Material Grade 40Cr, Bearing Protection Not Applicable, Maximum Operating Pressure 100 psi, Includes Muffler, Keyway Width 1/4 in, Weight 72.32 lb, Housing Material Grade Not Applicable
Out of stock
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.