| Application | Fuel and Water Pumps, Gearboxes and Transmission Housings, Split Crankcases, Thermostats |
| Color | Purple |
| Size | 50 mL |
| Temp. Range | -65 to 300 Degrees F |
| Item | Anaerobic Gasket Maker |
| Type | Flexible Seal |
| Full Cure | 24 hr |
| Begins to Harden | 10 min |
| Flash Point | 199.4 Degrees F |
| Specific Gravity | 1.1 |
| Tensile Strength | 14 N/sq mm |
| Shear Strength | 1,000 psi |
| VOC Content | 15.4 g/L |
| Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
| Series | 515 |
| Container Size | 1.69 fl oz |
| Container Type | Tube |
| Chemical Base | Methacrylate Ester |
| Product Type | Anaerobic Flange Sealant |
| Specific Sealing Application | Rigid Assemblies |
| Resistance Sensor Safe and Standards | No California Proposition 65, No CERCLA/SARA Section 302 EHS, No CERCLA/SARA Section 311/312, No CERCLA/SARA Section 313, No OSHA 29 CFR 1910.1200, No TSCA |
| Sensor Safe | No |
| Minimum Viscosity | 150,000 cps |
| Working Time | 30 min |
| Cure Type | Anaerobic |
| Maximum Viscosity | 1,700,000 cps |
| Resistance and Brand | LOCTITE |
| Minimum Operating Temperature | 14 Degrees F |
| For Material Type | Aluminum, Steel |
| Compatible Materials | Aluminum, Steel |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Maximum Gap Fill Size | 0.01 in |
| Maximum Operating Temperature | 300 Degrees F |
| Operating Temperature Range | 14 Degrees F to 300 Degrees F |
| Sealing Application | For Rigid Assemblies |
| Full Cure Time | 1 day |
| Subhead Properties | Standard |
| Brand & Series | LOCTITE 515 |
| Product Form | Gel |
| Sealant Type | Gasket Maker |
| Properties | Standard |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Anaerobic Gasket Maker, 515, 1.69 fl oz, Tube, Purple, LOCTITE, Mfr# 135479
$19,19
Free shipping will be applied on orders over $50
Anaerobic Gasket Maker, Color Purple, Container Size 1.69 fl oz, Container Type Tube, Full Cure Time 1 day, Cure Type Anaerobic, Maximum Gap Fill Size 0.01 in, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 14 Degrees F, Series 515, Working Time 30 min, For Material Type Aluminum, Steel, Standards California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
9999 in stock
Must order in multiples of 1
Subtotal:
$19.19
You must be logged in to post a review.
WARNING: Cancer - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.