Application | Apply a Continuous Bead of Product and Assemble the Mating Parts without Excessive Lateral Movement. Remove Excessive Contamination Such as Grease, Heavy Oils, and Dirt with Cleaning Solvent 7070 for Best Results. |
Color | Purple |
Size | 850 mL |
Substrates | Metal-to-Metal Assemblies |
Temp. Range | up to 300 Degrees F |
Item | Anaerobic Gasket Sealant |
Type | Anaerobic Sealant |
Full Cure | 48 hr |
Begins to Harden | Partial Cure is Obtained in 4 hr |
Expansion Ratio | Fills Gaps Up to 0.050 in When Used On Active Metals with Loctite(R) 7649(TM) Primer N |
Viscosity | Thixotropic Paste |
Specific Gravity | 1.1 |
Flash Point | 199.4 Degrees F |
Characteristics | Eliminates most cut gaskets. Improves flange sealing reliability by overcoming problems associated with pre-cut gaskets and other formed-in-place gaskets. Anaerobic, ready-to-use gel-like material cures at room temperature. While uncured, product provides instant-seal properties for low-pressure production line testing. |
Container Type | Cartridge |
Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
Container Size | 28.74 fl oz |
VOC Content | 134 g/L |
Tensile Strength | 14 N/sq mm |
Chemical Base | Methacrylate Ester |
Minimum Operating Temperature | -10 Degrees C |
For Material Type | Aluminum, Steel |
Consistency | Gel |
Minimum Viscosity | 150,000 cps |
Product Form | Gel |
Container Size and Type | 28.74 fl oz Cartridge |
Min Operating Temperature | Above -29 Degrees F |
Container Size Range | Over 16.1 oz |
VOC Content Range | More Than 100 g/L |
Cure Type | Anaerobic |
Pack Size | 1 EA |
Full Cure Time | 2 day |
Maximum Gap Fill Size | 0.05 in |
Color Family | Purple |
Working Time | 30 min |
Operating Temperature Range | -10 Degrees C to 150 Degrees C |
Shear Strength | 1,000 psi |
Compatible Materials | Metal |
Specific Sealing Application | Axle Covers, Compressors, Pumps, Thermostats, Transmission Housings |
Brand & Series | LOCTITE |
Sealant Type | Gasket Sealant |
Maximum Viscosity | 1,700,000 cps |
Working Time Range | 6 min to 30 min |
Resistance Sensor Safe and Standards | California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA |
Storage Requirements | 8 Degrees to 21 Degrees C |
Maximum Operating Temperature | 150 Degrees C |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Anaerobic Sealant Anaerobic Gasket Sealant, 850 mL, Purple, Temp Range up to 300 Degrees F, LOCTITE, Mfr# 229647
$400,99
-$12.03 / ea
with subscription
Free shipping will be applied on orders over $50
Anaerobic Gasket Sealant, Color Purple, Container Size 28.74 fl oz, Container Type Cartridge, Full Cure Time 2 day, Cure Type Anaerobic, Maximum Gap Fill Size 0.05 in, Maximum Operating Temperature 150 Degrees C, Minimum Operating Temperature -10 Degrees C, Working Time 30 min, Product Form Gel, For Material Type Aluminum, Steel, Standards California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
9999 in stock
Must order in multiples of 1
Subtotal:
$400.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.