Item | Linear Ball Bearing |
Type | Open |
Bore Dia. | 1.5 in |
Outside Dia. | 2 3/8 in |
Material | Delrin |
Dynamic Load Capacity (Lb.) | 3,880 |
Dimension F | 0.2 in |
Temp. Range (F) | 0 a 185 |
Between Grooves (mm) | 2.442 in |
Steady State Speed | 10 fps |
Dimension C1 | 2.442 in |
Retention Hole Location | 0.19 in |
Slot Width (In.) | 0.74 in |
Required Housing Bore Dia. (In.) | 2.375 in |
Length (In.) | 3 in |
Retention Hole Dia. (mm) | 0.2 in |
Dimension T | 1.5 |
For Use With | Thomson Shafting |
Inside Dia. Tolerance | +/-0.001 |
Slot Angle (Degrees) | 30 Degrees |
Dimension G | 0.190 in |
Self-Alignment | Self-Aligning |
Dimension C | 3 in |
Accelerated Speed | 450 fps |
Dynamic Load Capacity (N) | 3,880 lbf |
Series | Super Smart |
Operating Temperature Range | 185 Degrees F |
Maximum Operating Temperature | 185 Degrees F |
Inside Dia. | 1 1/2 in |
Included Wiper Seals | No Wipers |
System of Measurement | Inch |
Brand & Series | THOMSON Super Smart |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Ball Bushing, Bore Dia 1.500 In, THOMSON, Mfr# SSU24OPN
$219,99
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 1 1/2 in, Outside Dia. 2 3/8 in, Material Delrin, Accelerated Speed 450 fps, Between Grooves (mm) 2.442 in, Dimension C 3 in, Dimension C1 2.442 in, Dimension F 0.2 in, Dimension G 0.190 in, Dimension T 1.5, Dynamic Load Capacity (N) 3,880 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-0.001, Maximum Operating Temperature 185 Degrees F, Length (In.) 3 in, Retention Hole Dia. (mm) 0.2 in, Retention Hole Location 0.19 in, Seal -
9999 in stock
Must order in multiples of 1
Subtotal:
$219.99
You must be logged in to post a review.
Reviews
There are no reviews yet.