| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 20 mm |
| Outside Dia. | 32 mm |
| Material | Delrin |
| Dimension T | 20 |
| Length (mm) | 45 mm |
| Accelerated Speed | 150 mm/sec |
| Dynamic Load Capacity (N) | 4,000 N |
| Load Capacity | 4,000 |
| Inside Dia. Tolerance | + .013 |
| For Use With | Thomson Shafting |
| Self-Alignment | Self-Aligning |
| Slot Width (mm) | 10 mm |
| Slot Width (In.) | 10 mm |
| Temp. Range (F) | 0 - 185 |
| Dimension F | 3 mm |
| Dimension C1 | 31.2 mm |
| Between Grooves (mm) | 31.2 mm |
| Dimension C | 45 in |
| Required Housing Bore Dia. (mm) | 32 mm |
| Retention Hole Location | 0mm from the Center line |
| Slot Angle (Degrees) | 50 Degrees |
| Dimension G | 0 mm from Center Line |
| Retention Hole Dia. (mm) | 3 mm |
| Steady State Speed | 3 mm/sec |
| Length (In.) | 45 mm |
| Operating Temperature Range | 0 Degrees F to 185 Degrees F |
| Included Wiper Seals | No Wipers |
| Series | Super Smart |
| Minimum Operating Temperature | 0 Degrees F |
| Brand & Series | THOMSON Super Smart |
| Maximum Operating Temperature | 185 Degrees F |
| Inside Dia. | 20 mm |
| System of Measurement | Metric |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 20 mm, THOMSON, Mfr# SSEM20OPN
$68,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 20 mm, Outside Dia. 32 mm, Material Delrin, Accelerated Speed 150 mm/sec, Between Grooves (mm) 31.2 mm, Dimension C 45 in, Dimension C1 31.2 mm, Dimension F 3 mm, Dimension G 0 mm from Center Line, Dimension T 20, Dynamic Load Capacity (N) 4,000 N, For Use With Thomson Shafting, Inside Dia. Tolerance + .013, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature 0 Degrees F, Length (In.) 45 mm, Retention Hole Dia. (mm) 3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$68.99
You must be logged in to post a review.
Reviews
There are no reviews yet.