Item | Linear Ball Bearing |
Type | Open |
Bore Dia. | 20 mm |
Outside Dia. | 32 mm |
Material | Delrin |
For Use With | Thomson Shafting |
Length (In.) | 45 mm |
Between Grooves (mm) | 31.2 mm |
Slot Width (In.) | 10 mm |
Temp. Range (F) | 0 - 185 |
Retention Hole Dia. (mm) | 3 mm |
Slot Width (mm) | 10 mm |
Dynamic Load Capacity (N) | 4,000 N |
Self-Alignment | Self-Aligning |
Dimension C | 45 in |
Required Housing Bore Dia. (mm) | 32 mm |
Dimension C1 | 31.2 mm |
Steady State Speed | 3 mm/sec |
Accelerated Speed | 150 mm/sec |
Length (mm) | 45 mm |
Slot Angle (Degrees) | 50 Degrees |
Retention Hole Location | 0mm from the Center line |
Dimension T | 20 |
Dimension F | 3 mm |
Load Capacity | 4,000 |
Dimension G | 0 mm from Center Line |
Inside Dia. Tolerance | + .013 |
Inside Dia. | 20 mm |
System of Measurement | Metric |
Series | Super Smart |
Minimum Operating Temperature | 0 Degrees F |
Operating Temperature Range | 0 Degrees F to 185 Degrees F |
Brand & Series | THOMSON Super Smart |
Maximum Operating Temperature | 185 Degrees F |
Included Wiper Seals | Two Integral Wipers |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Ball Bushing, Bore Dia 20 mm, THOMSON, Mfr# SSEM20OPNWW
$89,39
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 20 mm, Outside Dia. 32 mm, Material Delrin, Accelerated Speed 150 mm/sec, Between Grooves (mm) 31.2 mm, Dimension B -, Dimension C 45 in, Dimension C1 31.2 mm, Dimension C2 -, Dimension d -, Dimension E -, Dimension F 3 mm, Dimension G 0 mm from Center Line, Dimension T 20, Dynamic Load Capacity (N) 4,000 N, For Use With Thomson Shafting, Inside Dia. Tolerance + .013, Maximum Operating Temperature 185 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$89.39
You must be logged in to post a review.
Reviews
There are no reviews yet.