| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 25 mm |
| Outside Dia. | 40 mm |
| Material | Delrin |
| Dimension T | 25 |
| Retention Hole Location | 1.50mm under the Center Line |
| Length (In.) | 58 mm |
| Accelerated Speed | 150 mm/sec |
| Inside Dia. Tolerance | + .013 |
| Slot Width (In.) | 12.5 mm |
| Load Capacity | 6,700 |
| Slot Angle (Degrees) | 60 Degrees |
| Length (mm) | 58 mm |
| Slot Width (mm) | 12.5 mm |
| Temp. Range (F) | 0 - 185 |
| Dimension C | 58 in |
| Dimension C1 | 43.7 mm |
| Dimension G | 1.50 mm Below Center Line |
| Required Housing Bore Dia. (mm) | 40 mm |
| Between Grooves (mm) | 43.7 mm |
| Self-Alignment | Self-Aligning |
| For Use With | Thomson Shafting |
| Steady State Speed | 3 mm/sec |
| Dynamic Load Capacity (N) | 6,700 N |
| Dimension F | 3 mm |
| Retention Hole Dia. (mm) | 3 mm |
| Series | Super Smart |
| Brand & Series | THOMSON Super Smart |
| System of Measurement | Metric |
| Included Wiper Seals | No Wipers |
| Maximum Operating Temperature | 185 Degrees F |
| Minimum Operating Temperature | 0 Degrees F |
| Inside Dia. | 25 mm |
| Operating Temperature Range | 0 Degrees F to 185 Degrees F |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 25 mm, THOMSON, Mfr# SSEM25OPN
$90,89
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 25 mm, Outside Dia. 40 mm, Material Delrin, Accelerated Speed 150 mm/sec, Between Grooves (mm) 43.7 mm, Dimension C 58 in, Dimension C1 43.7 mm, Dimension F 3 mm, Dimension G 1.50 mm Below Center Line, Dimension T 25, Dynamic Load Capacity (N) 6,700 N, For Use With Thomson Shafting, Inside Dia. Tolerance + .013, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature 0 Degrees F, Length (In.) 58 mm, Retention Hole Dia. (mm) 3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$90.89
You must be logged in to post a review.
Reviews
There are no reviews yet.