Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 10 in |
Voltage | 115/230 |
Motor HP | 1/2 hp |
Motor Type | General Duty, Single Phase |
Shaft Dia. (In.) | 14 mm |
Material | Plastic Wheel & Plastic Housing |
Hz | 60 Hz |
CFM @ 0.500-In. SP | 400 |
Wheel Material | Plastic |
Bearing Type | Sealed, Permanently Lubricated Ball |
Full Load Amps | 5.26/2.63 |
Rotation | CCW |
Motor RPM | 1,725 RPM |
dBA @ 5 Feet | 58 dBA |
CFM @ 1.250-In. SP | 600 |
Includes | Motor Mounting Base |
Agency Compliance | AMCA and CSA certified, UL Listed |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Max. Ambient Temp. (F) | -13 Degrees F |
CFM @ 0.750-In. SP | 500 |
Blower RPM | 1,725 RPM |
Housing Material | Plastic |
Motor Frame | 71 |
Inlet Dia. (In.) | 7.87 in |
Wheel Type | Forward-Curved |
Phase | 1 |
Housing Finish | Polypropylene |
CFM @ 1.000-In. SP | 600 |
Motor Enclosure | Totally Enclosed Fan Cooled |
Width (In.) | 18.25 in |
Wheel Width (In.) | 5.5 in |
Depth (In.) | 19.21 in |
Outlet Dia. (In.) | 8.62 in |
Height (In.) | 29.99 in |
Includes Motor | Yes |
Inlet Diameter | 7 13/16 in |
Thermal Overload Protection | Yes |
Inlet Type | Single-Inlet |
Airflow @ 0.750 in SP | 500 cfm |
Housing Height | 29 15/16 in |
Airflow @ 0.500 in SP Range | 0 to 999 cfm |
Maximum Inlet Air Temperature | 140 Degrees F |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Assembly | Assembled |
Airflow @ Static Pressures | 600 cfm @ 1.000 in SP |
Flange Type_broad | Outlet |
Corrosion Resistant | Yes |
Shaft Diameter | 14 mm |
Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
Housing Width | 18 1/4 in |
Airflow @ 1.250 in SP | 600 cfm |
Minimum Ambient Temperature | -40 Degrees C |
Outlet Shape_broad | Round |
Minimum Fan Speed | 1,725 RPM |
Airflow @ 0.500 in SP | 400 cfm |
Airflow @ 1.000 in SP | 600 cfm |
Outlet Shape | Round |
Mounting Orientation | Multiposition |
Wheel Diameter | 10 in |
Maximum Static Pressure | 2 1/4 in wc |
Includes Drive Package | Yes |
Standards | AMCA Certified, CSA Certified, UL Listed |
Motor Frame Designation | 71 |
Number of Discharge Positions | 2 |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
Outlet Diameter | 8 9/16 in |
Maximum Ambient Temperature | -13 Degrees F |
Outlet Height | Not Applicable |
Nominal Voltage | 115/230V AC |
Motor Speed | 1,725 RPM |
Maximum Fan Speed | 1,725 RPM |
Drive Type | Direct Drive |
Number of Inlets | 1 |
Outlet Width | Not Applicable |
Motor Horsepower | 1/2 hp |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Flange Size | Not Applicable |
Flange Type | Non-Flanged |
Outlet Size | 8 1/2 in diameter |
For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
Mount Type | Motor Mount |
Current | 5.26/2.63 A |
Overall Width | 18 1/4 in |
Nameplate Voltage | 115/230V AC |
Overall Depth | 19 3/16 in |
Overall Height | 29 15/16 in |
Includes Mounting Hardware | Yes |
Sound Level | 58 dBA @ 5 ft |
Wheel Width | 5 1/2 in |
Frequency | 60 Hz |
Wheel Dimensions | 10 in Dia. x 5 1/2 in W |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 10 in, PLASTEC, Mfr# P25SS4P050
$1984,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 10 in, Airflow @ 0.500 in SP 400 cfm, Airflow @ 0.750 in SP 500 cfm, Airflow @ 1.000 in SP 600 cfm, Airflow @ 1.250 in SP 600 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.