| Item | Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 10 in |
| Voltage | 230/460 |
| Motor HP | 1/2 hp |
| Motor Type | General Duty, Three Phase |
| Material | Plastic Wheel & Plastic Housing |
| Wheel Material | Plastic |
| Blower RPM | 1,725 RPM |
| Inlet Dia. (In.) | 7.87 in |
| CFM @ 1.500-In. SP | 800 |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Wheel Width (In.) | 5.5 in |
| Height (In.) | 29.99 in |
| Full Load Amps | 1.78/0.89 |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| dBA @ 5 Feet | 58 dBA |
| CFM @ 1.000-In. SP | 600 |
| Housing Material | Plastic |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Rotation | CCW |
| CFM @ 1.250-In. SP | 700 |
| Motor Frame | 71 |
| Width (In.) | 18.25 in |
| Housing Finish | Polypropylene |
| Depth (In.) | 18.59 in |
| Outlet Dia. (In.) | 8.62 in |
| Hz | 50/60 Hz |
| Includes | Motor Mounting Base |
| Wheel Type | Forward-Curved |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Phase | 3 |
| Motor RPM | 1,725 RPM |
| Shaft Dia. (In.) | 14 mm |
| Current | 1.78/0.89 A |
| Overall Height | 29 15/16 in |
| Motor Frame Designation | 71 |
| Airflow @ 1.000 in SP | 600 cfm |
| Inlet Type | Single-Inlet |
| Maximum Fan Speed | 1,725 RPM |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
| Sound Level | 58 dBA @ 5 ft |
| Number of Inlets | 1 |
| Includes Motor | Yes |
| Nameplate Voltage | 230/460V AC |
| Shaft Diameter | 14 mm |
| Assembly | Assembled |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Frequency | 50/60 Hz |
| For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
| Motor Speed | 1,725 RPM |
| Mount Type | Motor Mount |
| Housing Height | 29 15/16 in |
| Number of Discharge Positions | 2 |
| Outlet Shape_broad | Round |
| Airflow @ 1.500 in SP Range | 0 to 999 cfm |
| Minimum Ambient Temperature | -40 Degrees C |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Maximum Static Pressure | 2 1/4 in wc |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Includes Mounting Hardware | Yes |
| Overall Width | 18 1/4 in |
| Outlet Size | 8 1/2 in diameter |
| Drive Type | Direct Drive |
| Outlet Diameter | 8 9/16 in |
| Motor Horsepower | 1/2 hp |
| Flange Type | Non-Flanged |
| Maximum Ambient Temperature | -13 Degrees F |
| Inlet Diameter | 7 13/16 in |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Outlet Shape | Round |
| Corrosion Resistant | Yes |
| Housing Width | 18 1/4 in |
| Wheel Width | 5 1/2 in |
| Wheel Dimensions | 10 in Dia. x 5 1/2 in W |
| Wheel Diameter | 10 in |
| Airflow @ Static Pressures | 600 cfm @ 1.000 in SP / 800 cfm @ 1.500 in SP |
| Flange Type_broad | Outlet |
| Overall Depth | 18 9/16 in |
| Nominal Voltage | 230/460V AC |
| Outlet Width | Not Applicable |
| Thermal Overload Protection | Yes |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Minimum Fan Speed | 1,725 RPM |
| Mounting Orientation | Multiposition |
| Outlet Height | Not Applicable |
| Flange Size | Not Applicable |
| Airflow @ 1.500 in SP | 800 cfm |
| Includes Drive Package | Yes |
| Airflow @ 1.250 in SP | 700 cfm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Blower, Forward Curve, 10 in, PLASTEC, Mfr# P25ST4P050
$1960,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 10 in, Airflow @ 1.000 in SP 600 cfm, Airflow @ 1.250 in SP 700 cfm, Airflow @ 1.500 in SP 800 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.