| Item | Blower |
| Type | Direct Drive Forward Curve, Hazardous Location, |
| Wheel Dia. (In.) | 10 in |
| Voltage | 115/230 |
| Motor HP | 1/4 hp |
| Motor Type | Hazardous Location, Single Phase |
| Height (In.) | 29.43 in |
| Motor Enclosure | Explosion Proof |
| Inlet Dia. (In.) | 7.87 in |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Material | Plastic Wheel & Plastic Housing |
| Shaft Dia. (In.) | 14 mm |
| CFM @ 0.250-In. SP | 900 |
| Wheel Type | Forward-Curved |
| Depth (In.) | 22.07 in |
| Width (In.) | 16.25 in |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Full Load Amps | 5.6/2.8 |
| Phase | 1 |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| dBA @ 5 Feet | 58 dBA |
| Motor RPM | 1,140 RPM |
| Motor Frame | 71 |
| Housing Finish | Polypropylene |
| CFM @ 0.750-In. SP | 800 |
| Housing Material | Plastic |
| Wheel Width (In.) | 5.5 in |
| Hz | 60 Hz |
| Outlet Dia. (In.) | 8.62 in |
| CFM @ 0.500-In. SP | 900 |
| CFM @ 0.200-In. SP | 900 |
| Wheel Material | Plastic |
| Includes | Motor Mounting Base |
| Rotation | CCW |
| Blower RPM | 1,140 RPM |
| Maximum Ambient Temperature | -13 Degrees F |
| Flange Type_broad | Outlet |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Overall Height | 29 3/8 in |
| Maximum Fan Speed | 1,140 RPM |
| For Fan Speed (Dependent on Motor) | 1,140 RPM to 1,140 RPM |
| Motor Frame Designation | 71 |
| Outlet Width | Not Applicable |
| Mount Type | Motor Mount |
| Housing Width | 16 1/4 in |
| Maximum Static Pressure | 1 in wc |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Wheel Dimensions | 10 in Dia. x 5 1/2 in W |
| Spark Resistant Construction Type | A |
| Overall Width | 16 1/4 in |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
| Nameplate Voltage | 115/230V AC |
| Motor Speed | 1,140 RPM |
| Shaft Diameter | 14 mm |
| Includes Drive Package | Yes |
| Minimum Ambient Temperature | -40 Degrees C |
| Motor Horsepower | 1/4 hp |
| Number of Discharge Positions | 2 |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Includes Motor | Yes |
| Inlet Type | Single-Inlet |
| Number of Inlets | 1 |
| Thermal Overload Protection | Yes |
| Flange Size | Not Applicable |
| Housing Height | 29 3/8 in |
| Outlet Diameter | 8 9/16 in |
| Nominal Voltage | 115/230V AC |
| Wheel Diameter | 10 in |
| Outlet Shape_broad | Round |
| Inlet Diameter | 7 13/16 in |
| Hazardous Location Application | Yes |
| Wheel Width | 5 1/2 in |
| Airflow @ Static Pressures | 900 cfm @ 0.250 in SP |
| Outlet Shape | Round |
| Assembly | Assembled |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Minimum Fan Speed | 1,140 RPM |
| Outlet Height | Not Applicable |
| Sound Level | 58 dBA @ 5 ft |
| Outlet Size | 8 1/2 in diameter |
| Current | 5.6/2.8 A |
| Flange Type | Non-Flanged |
| Overall Depth | 22 1/16 in |
| Airflow @ 0.500 in SP | 900 cfm |
| Frequency | 60 Hz |
| Airflow @ 0.500 in SP Range | 0 to 999 cfm |
| Airflow @ 0.250 in SP | 900 cfm |
| Airflow @ 0.750 in SP | 800 cfm |
| Includes Mounting Hardware | Yes |
| Drive Type | Direct Drive |
| Mounting Orientation | Multiposition |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Blower, Forward Curve, 10 in, PLASTEC, Mfr# P25XS6P025
$5167,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 10 in, Airflow @ 0.250 in SP 900 cfm, Airflow @ 0.500 in SP 900 cfm, Airflow @ 0.750 in SP 800 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.