Item | Blower |
Type | Direct Drive Forward Curve, Hazardous Location, |
Wheel Dia. (In.) | 10 in |
Voltage | 230/460 |
Motor HP | 4 hp |
Motor Type | Hazardous Location, Three Phase |
Includes | Motor Mounting Base |
Wheel Width (In.) | 5.5 in |
Hz | 50/60 Hz |
Motor Enclosure | Explosion Proof |
Height (In.) | 29.43 in |
Full Load Amps | 9.89/4.95 |
Inlet Dia. (In.) | 7.87 in |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Rotation | CCW |
Outlet Dia. (In.) | 8.62 in |
Shaft Dia. (In.) | 24 mm |
Motor RPM | 3,450 RPM |
Depth (In.) | 21.26 in |
Max. Ambient Temp. (F) | -13 Degrees F |
Wheel Material | Plastic |
Blower RPM | 3,450 RPM |
Bearing Type | Sealed, Permanently Lubricated Ball |
Housing Material | Plastic |
Housing Finish | Polypropylene |
Motor Frame | 90 |
CFM @ 4.000-In. SP | 1800 |
Material | Plastic Wheel & Plastic Housing |
Width (In.) | 16.25 in |
Phase | 3 |
Wheel Type | Forward-Curved |
dBA @ 5 Feet | 75 dBA |
Agency Compliance | AMCA and CSA certified, UL Listed |
Housing Width | 16 1/4 in |
Corrosion Resistant | Yes |
Minimum Fan Speed | 3,450 RPM |
Inlet Diameter | 7 13/16 in |
Outlet Shape_broad | Round |
Airflow @ Static Pressures | 1,800 cfm @ 4.000 in SP |
Mounting Orientation | Multiposition |
Thermal Overload Protection | Yes |
Sound Level | 75 dBA @ 5 ft |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Current | 9.89/4.95 A |
Flange Size | Not Applicable |
Outlet Diameter | 8 9/16 in |
Wheel Dimensions | 10 in Dia. x 5 1/2 in W |
Motor Speed | 3,450 RPM |
Maximum Ambient Temperature | -13 Degrees F |
Airflow @ 4.000 in SP | 1,800 cfm |
Includes Drive Package | Yes |
Flange Type | Non-Flanged |
Standards | AMCA Certified, CSA Certified, UL Listed |
Overall Height | 29 3/8 in |
Housing Height | 29 3/8 in |
Wheel Width | 5 1/2 in |
Outlet Size | 8 1/2 in diameter |
Spark Resistant Construction Type | A |
Assembly | Assembled |
Motor Frame Designation | 90 |
Frequency | 50/60 Hz |
Nameplate Voltage | 230/460V AC |
Overall Depth | 21 1/4 in |
Number of Inlets | 1 |
Outlet Height | Not Applicable |
Drive Type | Direct Drive |
Maximum Static Pressure | 9 in wc |
Wheel Diameter | 10 in |
Includes Motor | Yes |
Number of Discharge Positions | 2 |
For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
Motor Horsepower | 4 hp |
Flange Type_broad | Outlet |
Outlet Width | Not Applicable |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
Shaft Diameter | 24 mm |
Mount Type | Motor Mount |
Outlet Shape | Round |
Maximum Fan Speed | 3,450 RPM |
Hazardous Location Application | Yes |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Maximum Inlet Air Temperature | 140 Degrees F |
Minimum Ambient Temperature | -40 Degrees C |
Inlet Type | Single-Inlet |
Includes Mounting Hardware | Yes |
Nominal Voltage | 230/460V AC |
Overall Width | 16 1/4 in |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 10 in, PLASTEC, Mfr# P25XT2P400
$15679,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 10 in, Airflow @ 4.000 in SP 1,800 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.