Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 11.75 in |
Voltage | 230/460 |
Motor HP | 3 hp |
Motor Type | General Duty, Three Phase |
Rotation | CCW |
Wheel Material | Plastic |
Motor RPM | 3,450 RPM |
Material | Plastic Wheel & Plastic Housing |
Bearing Type | Sealed, Permanently Lubricated Ball |
Wheel Width (In.) | 3.5 in |
dBA @ 5 Feet | 97 dBA |
Includes | Motor Mounting Base |
CFM @ 4.000-In. SP | 700 |
Shaft Dia. (In.) | 24 mm |
Agency Compliance | AMCA and CSA certified, UL Listed |
CFM @ 3.000-In. SP | 300 |
Width (In.) | 20.59 in |
Motor Frame | 90 |
Hz | 50/60 Hz |
Height (In.) | 35.15 in |
Wheel Type | Forward-Curved |
Phase | 3 |
Blower RPM | 3,450 RPM |
Inlet Dia. (In.) | 6.5 in |
Outlet Dia. (In.) | 6.5 in |
Full Load Amps | 7.26/3.63 |
CFM @ 3.500-In. SP | 500 |
Housing Material | Plastic |
Housing Finish | Polypropylene |
Motor Enclosure | Totally Enclosed Fan Cooled |
Depth (In.) | 18.78 in |
Max. Ambient Temp. (F) | -13 Degrees F |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Airflow @ 3.000 in SP | 300 cfm |
Nominal Voltage | 230/460V AC |
Outlet Shape | Round |
Wheel Dimensions | 11 3/4 in Dia. x 3 1/2 in W |
Airflow @ Static Pressures | 700 cfm @ 4.000 in SP |
Shaft Diameter | 24 mm |
Overall Width | 20 9/16 in |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Standards | AMCA Certified, CSA Certified, UL Listed |
Current | 7.26/3.63 A |
Housing Height | 35 1/8 in |
Minimum Ambient Temperature | -40 Degrees C |
Mount Type | Motor Mount |
Inlet Diameter | 6 1/2 in |
Includes Motor | Yes |
Airflow @ 3.500 in SP | 500 cfm |
Corrosion Resistant | Yes |
Maximum Inlet Air Temperature | 140 Degrees F |
For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
Overall Depth | 18 3/4 in |
Drive Type | Direct Drive |
Includes Drive Package | Yes |
Motor Speed | 3,450 RPM |
Outlet Width | Not Applicable |
Flange Size | Not Applicable |
Mounting Orientation | Multiposition |
Maximum Static Pressure | 12 in wc |
Wheel Diameter | 11 3/4 in |
Overall Height | 35 1/8 in |
Frequency | 50/60 Hz |
Maximum Fan Speed | 3,450 RPM |
Thermal Overload Protection | Yes |
Wheel Width | 3 1/2 in |
Outlet Shape_broad | Round |
Minimum Fan Speed | 3,450 RPM |
Motor Frame Designation | 90 |
Maximum Ambient Temperature | -13 Degrees F |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Inlet Type | Single-Inlet |
Number of Discharge Positions | 2 |
Housing Width | 20 9/16 in |
Motor Horsepower | 3 hp |
Outlet Height | Not Applicable |
Number of Inlets | 1 |
Flange Type | Non-Flanged |
Airflow @ 4.000 in SP | 700 cfm |
Flange Type_broad | Outlet |
Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
Outlet Diameter | 6 1/2 in |
Outlet Size | 6 1/2 in diameter |
Nameplate Voltage | 230/460V AC |
Includes Mounting Hardware | Yes |
Assembly | Assembled |
Sound Level | 97 dBA @ 5 ft |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 11 3/4 in, PLASTEC, Mfr# S16ST2P300
$3286,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 11 3/4 in, Airflow @ 3.000 in SP 300 cfm, Airflow @ 3.500 in SP 500 cfm, Airflow @ 4.000 in SP 700 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.