| Item | Blower |
| Type | Direct Drive Forward Curve, Hazardous Location, |
| Wheel Dia. (In.) | 11.75 in |
| Voltage | 230/460 |
| Motor HP | 3 hp |
| Motor Type | Hazardous Location, Three Phase |
| CFM @ 4.000-In. SP | 700 |
| Inlet Dia. (In.) | 6.5 in |
| Material | Plastic Wheel & Plastic Housing |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Depth (In.) | 18.78 in |
| CFM @ 3.500-In. SP | 500 |
| Wheel Width (In.) | 3.5 in |
| Outlet Dia. (In.) | 6.5 in |
| Includes | Motor Mounting Base |
| Motor Frame | 90 |
| Shaft Dia. (In.) | 24 mm |
| Hz | 50/60 Hz |
| Height (In.) | 35.15 in |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| dBA @ 5 Feet | 97 dBA |
| Wheel Type | Forward-Curved |
| Housing Finish | Polypropylene |
| Blower RPM | 3,450 RPM |
| Width (In.) | 20.59 in |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Motor Enclosure | Explosion Proof |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Phase | 3 |
| Motor RPM | 3,450 RPM |
| Rotation | CCW |
| CFM @ 3.000-In. SP | 300 |
| Wheel Material | Plastic |
| Housing Material | Plastic |
| Full Load Amps | 7.0/3.5 |
| Frequency | 50/60 Hz |
| Spark Resistant Construction Type | A |
| Includes Drive Package | Yes |
| Number of Discharge Positions | 2 |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Wheel Diameter | 11 3/4 in |
| Motor Frame Designation | 90 |
| Housing Width | 20 9/16 in |
| Includes Mounting Hardware | Yes |
| Nameplate Voltage | 230/460V AC |
| Flange Type_broad | Outlet |
| Motor Speed | 3,450 RPM |
| Outlet Size | 6 1/2 in diameter |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
| Outlet Shape | Round |
| Corrosion Resistant | Yes |
| Maximum Fan Speed | 3,450 RPM |
| Includes Motor | Yes |
| Wheel Dimensions | 11 3/4 in Dia. x 3 1/2 in W |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Airflow @ 4.000 in SP | 700 cfm |
| Number of Inlets | 1 |
| Overall Width | 20 9/16 in |
| Current | 7/3.5 A |
| Inlet Diameter | 6 1/2 in |
| Overall Depth | 18 3/4 in |
| Shaft Diameter | 24 mm |
| Airflow @ 3.000 in SP | 300 cfm |
| Wheel Width | 3 1/2 in |
| Mount Type | Motor Mount |
| Nominal Voltage | 230/460V AC |
| For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
| Housing Height | 35 1/8 in |
| Minimum Ambient Temperature | -40 Degrees C |
| Flange Type | Non-Flanged |
| Assembly | Assembled |
| Motor Horsepower | 3 hp |
| Airflow @ Static Pressures | 700 cfm @ 4.000 in SP |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Outlet Diameter | 6 1/2 in |
| Overall Height | 35 1/8 in |
| Hazardous Location Application | Yes |
| Outlet Height | Not Applicable |
| Flange Size | Not Applicable |
| Minimum Fan Speed | 3,450 RPM |
| Outlet Width | Not Applicable |
| Inlet Type | Single-Inlet |
| Maximum Ambient Temperature | -13 Degrees F |
| Airflow @ 3.500 in SP | 500 cfm |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Thermal Overload Protection | Yes |
| Outlet Shape_broad | Round |
| Sound Level | 97 dBA @ 5 ft |
| Drive Type | Direct Drive |
| Mounting Orientation | Multiposition |
| Maximum Static Pressure | 12 in wc |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Blower, Forward Curve, 11 3/4 in, PLASTEC, Mfr# S16XT2P300
$6220,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 11 3/4 in, Airflow @ 3.000 in SP 300 cfm, Airflow @ 3.500 in SP 500 cfm, Airflow @ 4.000 in SP 700 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.