Item | Blower |
Type | Direct Drive Forward Curve, Hazardous Location, |
Wheel Dia. (In.) | 11.875 in |
Voltage | 115/230 |
Motor HP | 3/4 hp |
Motor Type | Hazardous Location, Single Phase |
Wheel Material | Plastic |
Wheel Width (In.) | 6.5 in |
Wheel Type | Forward-Curved |
Outlet Dia. (In.) | 10.75 in |
Material | Plastic Wheel & Plastic Housing |
CFM @ 0.500-In. SP | 1000 |
Shaft Dia. (In.) | 24 mm |
Hz | 60 Hz |
Bearing Type | Sealed, Permanently Lubricated Ball |
Motor Frame | 90 |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Agency Compliance | AMCA and CSA certified, UL Listed |
CFM @ 1.250-In. SP | 1100 |
Height (In.) | 35.56 in |
Housing Finish | Polypropylene |
Includes | Motor Mounting Base |
Phase | 1 |
Motor Enclosure | Explosion Proof |
Depth (In.) | 22.44 in |
CFM @ 1.000-In. SP | 1500 |
Housing Material | Plastic |
Full Load Amps | 10.6/5.3 |
Max. Ambient Temp. (F) | -13 Degrees F |
Width (In.) | 19.28 in |
Blower RPM | 1,140 RPM |
Motor RPM | 1,140 RPM |
Inlet Dia. (In.) | 9.84 in |
dBA @ 5 Feet | 44 dBA |
CFM @ 0.750-In. SP | 1500 |
Rotation | CCW |
Airflow @ 0.500 in SP | 1,000 cfm |
Outlet Shape_broad | Round |
Flange Type_broad | Outlet |
Minimum Ambient Temperature | -40 Degrees C |
Outlet Width | Not Applicable |
Includes Drive Package | Yes |
Hazardous Location Application | Yes |
Nominal Voltage | 115/230V AC |
Standards | AMCA Certified, CSA Certified, UL Listed |
Current | 10.6/5.3 A |
Overall Width | 19 1/4 in |
Inlet Type | Single-Inlet |
Overall Depth | 22 7/16 in |
Outlet Shape | Round |
Assembly | Assembled |
Motor Speed | 1,140 RPM |
Sound Level | 44 dBA @ 5 ft |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Minimum Fan Speed | 1,140 RPM |
Motor Horsepower | 3/4 hp |
Drive Type | Direct Drive |
Includes Mounting Hardware | Yes |
Flange Size | Not Applicable |
Wheel Dimensions | 11 7/8 in Dia. x 6 1/2 in W |
Number of Discharge Positions | 2 |
Airflow @ 0.500 in SP Range | 1000 to 1999 |
Outlet Size | 10 3/4 in diameter |
Airflow @ 0.750 in SP | 1,500 cfm |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
Thermal Overload Protection | Yes |
Mount Type | Motor Mount |
Wheel Diameter | 11 7/8 in |
Outlet Height | Not Applicable |
Wheel Width | 6 1/2 in |
Overall Height | 35 1/2 in |
Inlet Diameter | 9 13/16 in |
Frequency | 60 Hz |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Spark Resistant Construction Type | A |
Airflow @ 1.000 in SP | 1,500 cfm |
Motor Frame Designation | 90 |
Shaft Diameter | 24 mm |
Number of Inlets | 1 |
Maximum Fan Speed | 1,140 RPM |
Maximum Inlet Air Temperature | 140 Degrees F |
Maximum Ambient Temperature | -13 Degrees F |
Housing Width | 19 1/4 in |
Includes Motor | Yes |
Flange Type | Non-Flanged |
Airflow @ Static Pressures | 1,500 cfm @ 1.000 in SP |
Corrosion Resistant | Yes |
Housing Height | 35 1/2 in |
Nameplate Voltage | 115/230V AC |
For Fan Speed (Dependent on Motor) | 1,140 RPM to 1,140 RPM |
Mounting Orientation | Multiposition |
Outlet Diameter | 10 3/4 in |
Airflow @ 1.250 in SP | 1,100 cfm |
Maximum Static Pressure | 1 1/2 in wc |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 11 7/8 in, PLASTEC, Mfr# P30XS6P075
$6159,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 11 7/8 in, Airflow @ 0.500 in SP 1,000 cfm, Airflow @ 0.750 in SP 1,500 cfm, Airflow @ 1.000 in SP 1,500 cfm, Airflow @ 1.250 in SP 1,100 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.