| Property | Value |
|---|---|
| Item | Blower |
| Type | Direct Drive Forward Curve, Hazardous Location, |
| Wheel Dia. (In.) | 6 in |
| Voltage | 115/230 |
| Motor HP | 1/4 hp |
| Motor Type | Hazardous Location, Single Phase |
| CFM @ 0.500-In. SP | 60 |
| Housing Finish | Polypropylene |
| Wheel Material | Plastic |
| CFM @ 0.250-In. SP | 40 |
| Housing Material | Plastic |
| Includes | Motor Mounting Base |
| Hz | 60 Hz |
| Motor Frame | 71 |
| Wheel Type | Forward-Curved |
| Motor RPM | 1,725 RPM |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Inlet Dia. (In.) | 2.95 in |
| Blower RPM | 1,725 RPM |
| CFM @ 0.200-In. SP | 30 |
| Depth (In.) | 13.75 in |
| Outlet Dia. (In.) | 2.95 in |
| Height (In.) | 18.97 in |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| dBA @ 5 Feet | 56 dBA |
| Full Load Amps | 5.4/2.7 |
| Motor Enclosure | Explosion Proof |
| Shaft Dia. (In.) | 14 mm |
| Width (In.) | 8.64 in |
| Wheel Width (In.) | 1.88 in |
| Phase | 1 |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Rotation | CCW |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Wheel Diameter | 6 in |
| Minimum Ambient Temperature | -40 Degrees F |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
| Motor Frame Designation | 71 |
| Thermal Overload Protection | Yes |
| Maximum Fan Speed | 1,725 RPM |
| Overall Depth | 13 3/4 in |
| Includes Mounting Hardware | Yes |
| Drive Type | Direct Drive |
| Motor Speed | 1,725 RPM |
| Housing Height | 18 15/16 in |
| Replacement For | S10SS4P012 |
| Airflow @ 0.500 in SP | 60 cfm |
| Mounting Orientation | Multiposition |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Inlet Diameter | 2 15/16 in |
| Standards | AMCA Air Performance Certified, CSA Certified, UL Listed |
| Number of Inlets | 1 |
| Overall Height | 18 15/16 in |
| Outlet Shape | Round |
| Assembly | Assembled |
| Outlet Height | Not Applicable |
| Airflow @ 0.250 in SP | 40 cfm |
| Wheel Width | 1 7/8 in |
| Nameplate Voltage | 115/230V AC |
| Number of Discharge Positions | 2 |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Includes Drive Package | Yes |
| Overall Width | 8 5/8 in |
| Flange Size | Not Applicable |
| Housing Width | 8 5/8 in |
| Current | 5.4/2.7 A |
| Mount Type | Motor Mount |
| Shaft Diameter | 14 mm |
| Hazardous Location Application | Yes |
| Sound Level | 56 dBA @ 5 ft |
| Spark Resistant Construction Type | A |
| Frequency | 60 Hz |
| Maximum Ambient Temperature | -13 Degrees F |
| Flange Type | Non-Flanged |
| Motor Horsepower | 1/4 hp |
| Outlet Width | Not Applicable |
| Includes Motor | Yes |
| Outlet Diameter | 2 15/16 in |
| Minimum Fan Speed | 1,725 RPM |
| OEM Replacement | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Blower, Forward Curve, 6 in, Plastec, Mfr#: S10XS4P008
$2445.99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 6 in, Airflow @ 0.250 in SP 40 cfm, Airflow @ 0.500 in SP 60 cfm
9999 in stock
Subtotal:
$2445.99
You must be logged in to post a review.
Restrictions:
Restrictions States: CA,
Reviews
There are no reviews yet.