Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 7.875 in |
Voltage | 115/230 |
Motor HP | 1 1/2 hp |
Motor Type | General Duty, Single Phase |
Shaft Dia. (In.) | 14 mm |
Depth (In.) | 20.02 in |
Wheel Material | Plastic |
Motor RPM | 3,450 RPM |
Housing Finish | Polypropylene |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Rotation | CCW |
Height (In.) | 24.74 in |
Blower RPM | 3,450 RPM |
CFM @ 1.500-In. SP | 600 |
Motor Frame | 71 |
dBA @ 5 Feet | 73 dBA |
CFM @ 2.500-In. SP | 600 |
Includes | Motor Mounting Base |
CFM @ 2.000-In. SP | 600 |
Full Load Amps | 13.8/6.9 |
Wheel Type | Forward-Curved |
Housing Material | Plastic |
CFM @ 3.500-In. SP | 650 |
Max. Ambient Temp. (F) | -13 Degrees F |
Material | Plastic Wheel & Plastic Housing |
Bearing Type | Sealed, Permanently Lubricated Ball |
CFM @ 4.000-In. SP | 650 |
Outlet Dia. (In.) | 6.3 in |
Width (In.) | 15.25 in |
Agency Compliance | AMCA and CSA certified, UL Listed |
CFM @ 3.000-In. SP | 650 |
Inlet Dia. (In.) | 6.3 in |
Wheel Width (In.) | 4.13 in |
Hz | 60 Hz |
Phase | 1 |
Motor Enclosure | Totally Enclosed Fan Cooled |
Airflow @ 3.000 in SP | 650 cfm |
Wheel Width | 4 1/8 in |
Overall Height | 24 11/16 in |
Drive Type | Direct Drive |
Mounting Orientation | Multiposition |
Airflow @ 3.500 in SP | 650 cfm |
Sound Level | 73 dBA @ 5 ft |
Airflow @ 1.500 in SP Range | 0 to 999 cfm |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Frequency | 60 Hz |
Maximum Inlet Air Temperature | 140 Degrees F |
Current | 13.8/6.9 A |
Corrosion Resistant | Yes |
Maximum Ambient Temperature | -13 Degrees F |
Outlet Shape | Round |
Includes Mounting Hardware | Yes |
Outlet Width | Not Applicable |
Flange Type | Non-Flanged |
Includes Motor | Yes |
Inlet Type | Single-Inlet |
Outlet Shape_broad | Round |
Airflow @ 1.500 in SP | 600 cfm |
Maximum Static Pressure | 5 1/2 in wc |
Outlet Diameter | 6 1/4 in |
Assembly | Assembled |
Airflow @ 2.500 in SP | 600 cfm |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
Motor Horsepower | 1 1/2 hp |
Airflow @ 4.000 in SP | 650 cfm |
Number of Discharge Positions | 2 |
Maximum Fan Speed | 3,450 RPM |
Thermal Overload Protection | Yes |
Minimum Ambient Temperature | -40 Degrees C |
Mount Type | Motor Mount |
Airflow @ 2.000 in SP | 600 cfm |
Overall Depth | 20 in |
Wheel Dimensions | 7 7/8 in Dia. x 4 1/8 in W |
Motor Speed | 3,450 RPM |
Flange Type_broad | Outlet |
Wheel Diameter | 7 7/8 in |
Airflow @ Static Pressures | 600 cfm @ 1.500 in SP / 650 cfm @ 4.000 in SP |
Nominal Voltage | 115/230V AC |
Number of Inlets | 1 |
Shaft Diameter | 14 mm |
Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
Overall Width | 15 1/4 in |
Nameplate Voltage | 115/230V AC |
For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Motor Frame Designation | 71 |
Airflow @ 2.500 in SP Range | 0 to 999 cfm |
Housing Width | 15 1/4 in |
Inlet Diameter | 6 1/4 in |
Includes Drive Package | Yes |
Outlet Height | Not Applicable |
Flange Size | Not Applicable |
Minimum Fan Speed | 3,450 RPM |
Housing Height | 24 11/16 in |
Outlet Size | 6 1/4 in diameter |
Standards | AMCA Certified, CSA Certified, UL Listed |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 7 7/8 in, PLASTEC, Mfr# P20SS2P150
$2044,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 7 7/8 in, Airflow @ 1.500 in SP 600 cfm, Airflow @ 2.000 in SP 600 cfm, Airflow @ 2.500 in SP 600 cfm, Airflow @ 3.000 in SP 650 cfm, Airflow @ 3.500 in SP 650 cfm, Airflow @ 4.000 in SP 650 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$2044.99
You must be logged in to post a review.
Reviews
There are no reviews yet.