Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 7.875 in |
Voltage | 115/230 |
Motor HP | 1/2 hp |
Motor Type | Hazardous Location, Single Phase |
Outlet Dia. (In.) | 3.54 in |
Full Load Amps | 6.8/3.4 |
Bearing Type | Sealed, Permanently Lubricated Ball |
Wheel Type | Forward-Curved |
Housing Material | Plastic |
Motor Frame | 71 |
Depth (In.) | 13.78 in |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Shaft Dia. (In.) | 14 mm |
Rotation | CCW |
Material | Plastic Wheel & Plastic Housing |
Height (In.) | 20.15 in |
CFM @ 2.000-In. SP | 175 |
Blower RPM | 3,450 RPM |
Motor Enclosure | Explosion Proof |
Includes | Motor Mounting Base |
Motor RPM | 3,450 RPM |
Agency Compliance | AMCA and CSA certified, UL Listed |
Housing Finish | Polypropylene |
CFM @ 3.000-In. SP | 250 |
Phase | 1 |
Hz | 60 Hz |
CFM @ 1.500-In. SP | 100 |
dBA @ 5 Feet | 77 dBA |
Wheel Width (In.) | 2.75 in |
Wheel Material | Plastic |
Max. Ambient Temp. (F) | -13 Degrees F |
CFM @ 3.500-In. SP | 300 |
CFM @ 2.500-In. SP | 200 |
Width (In.) | 12.6 in |
Inlet Dia. (In.) | 3.54 in |
CFM @ 4.000-In. SP | 300 |
Mounting Orientation | Multiposition |
Airflow @ 3.000 in SP | 250 cfm |
Minimum Fan Speed | 3,450 RPM |
Spark Resistant Construction Type | A |
Overall Width | 12 9/16 in |
Airflow @ 2.000 in SP | 175 cfm |
Mount Type | Motor Mount |
Motor Horsepower | 1/2 hp |
For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
Airflow @ 2.500 in SP Range | 0 to 999 cfm |
Wheel Dimensions | 7 7/8 in Dia. x 2 3/4 in W |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
Outlet Shape_broad | Round |
Maximum Static Pressure | 4 1/2 in wc |
Motor Frame Designation | 71 |
Number of Discharge Positions | 2 |
Housing Height | 20 1/8 in |
Airflow @ 1.500 in SP Range | 0 to 999 cfm |
Inlet Diameter | 3 1/2 in |
Thermal Overload Protection | Yes |
Includes Mounting Hardware | Yes |
Outlet Diameter | 3 1/2 in |
Airflow @ 1.500 in SP | 100 cfm |
Sound Level | 77 dBA @ 5 ft |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Assembly | Assembled |
Corrosion Resistant | Yes |
Maximum Inlet Air Temperature | 140 Degrees F |
Flange Size | Not Applicable |
Overall Height | 20 1/8 in |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Motor Speed | 3,450 RPM |
Maximum Ambient Temperature | -13 Degrees F |
Airflow @ Static Pressures | 100 cfm @ 1.500 in SP / 300 cfm @ 4.000 in SP |
Flange Type_broad | Outlet |
Nominal Voltage | 115/230V AC |
Includes Motor | Yes |
Standards | AMCA Certified, CSA Certified, UL Listed |
Outlet Height | Not Applicable |
Wheel Diameter | 7 7/8 in |
Inlet Type | Single-Inlet |
Minimum Ambient Temperature | -40 Degrees C |
Flange Type | Non-Flanged |
Outlet Size | 3 1/2 in diameter |
Overall Depth | 13 3/4 in |
Maximum Fan Speed | 3,450 RPM |
Drive Type | Direct Drive |
Current | 6.8/3.4 A |
Shaft Diameter | 14 mm |
Nameplate Voltage | 115/230V AC |
Airflow @ 4.000 in SP | 300 cfm |
Airflow @ 3.500 in SP | 300 cfm |
Outlet Width | Not Applicable |
Airflow @ 2.500 in SP | 200 cfm |
Number of Inlets | 1 |
Wheel Width | 2 3/4 in |
Includes Drive Package | Yes |
Frequency | 60 Hz |
Outlet Shape | Round |
Housing Width | 12 9/16 in |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 7 7/8 in, PLASTEC, Mfr# S12XS2P050
$3596,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 7 7/8 in, Airflow @ 1.500 in SP 100 cfm, Airflow @ 2.000 in SP 175 cfm, Airflow @ 2.500 in SP 200 cfm, Airflow @ 3.000 in SP 250 cfm, Airflow @ 3.500 in SP 300 cfm, Airflow @ 4.000 in SP 300 cfm
0 in stock
Must order in multiples of 1
Subtotal:
$3596.99
You must be logged in to post a review.
Reviews
There are no reviews yet.