| Item | Blower |
| Type | Direct Drive Forward Curve, Hazardous Location, |
| Wheel Dia. (In.) | 9.875 in |
| Voltage | 230/460 |
| Motor HP | 1/2 hp |
| Motor Type | Hazardous Location, Three Phase |
| Wheel Width (In.) | 3.38 in |
| Full Load Amps | 2.0/1.0 |
| Motor RPM | 1,725 RPM |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Depth (In.) | 19.05 in |
| Wheel Type | Forward-Curved |
| Motor Enclosure | Explosion Proof |
| CFM @ 0.500-In. SP | 300 |
| Inlet Dia. (In.) | 4.53 in |
| Outlet Dia. (In.) | 4.53 in |
| Wheel Material | Plastic |
| Width (In.) | 16.53 in |
| Height (In.) | 25.54 in |
| Rotation | CCW |
| CFM @ 0.750-In. SP | 400 |
| Phase | 3 |
| Hz | 50/60 Hz |
| Includes | Motor Mounting Base |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Blower RPM | 1,725 RPM |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| CFM @ 0.200-In. SP | 200 |
| Housing Finish | Polypropylene |
| Motor Frame | 71 |
| Material | Plastic Wheel & Plastic Housing |
| Max. Ambient Temp. (F) | -13 Degrees F |
| CFM @ 0.250-In. SP | 250 |
| Shaft Dia. (In.) | 19 mm |
| dBA @ 5 Feet | 69 dBA |
| Housing Material | Plastic |
| Number of Inlets | 1 |
| Motor Speed | 1,725 RPM |
| Overall Width | 16 1/2 in |
| Outlet Size | 4 1/2 in diameter |
| Airflow @ 0.500 in SP Range | 0 to 999 cfm |
| Mount Type | Motor Mount |
| Wheel Diameter | 9 7/8 in |
| Current | 2/1 A |
| Hazardous Location Application | Yes |
| Includes Motor | Yes |
| Airflow @ 0.250 in SP | 250 cfm |
| Frequency | 50/60 Hz |
| Housing Height | 25 1/2 in |
| Overall Depth | 19 in |
| Inlet Type | Single-Inlet |
| Includes Drive Package | Yes |
| Corrosion Resistant | Yes |
| Spark Resistant Construction Type | A |
| Outlet Shape_broad | Round |
| Flange Type | Non-Flanged |
| Flange Size | Not Applicable |
| Wheel Width | 3 3/8 in |
| Outlet Height | Not Applicable |
| Assembly | Assembled |
| Maximum Ambient Temperature | -13 Degrees F |
| Includes Mounting Hardware | Yes |
| Thermal Overload Protection | Yes |
| Flange Type_broad | Outlet |
| Inlet Diameter | 4 1/2 in |
| Outlet Width | Not Applicable |
| For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
| Drive Type | Direct Drive |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature, Spark Resistant |
| Airflow @ Static Pressures | 250 cfm @ 0.250 in SP |
| Wheel Dimensions | 9 7/8 in Dia. x 3 3/8 in W |
| Minimum Ambient Temperature | -40 Degrees C |
| Outlet Shape | Round |
| Mounting Orientation | Multiposition |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Airflow @ 0.500 in SP | 300 cfm |
| Maximum Fan Speed | 1,725 RPM |
| Maximum Static Pressure | 2 in wc |
| Shaft Diameter | 19 mm |
| Motor Horsepower | 1/2 hp |
| Overall Height | 25 1/2 in |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Housing Width | 16 1/2 in |
| Number of Discharge Positions | 2 |
| Airflow @ 0.750 in SP | 400 cfm |
| Outlet Diameter | 4 1/2 in |
| Nominal Voltage | 230/460V AC |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Sound Level | 69 dBA @ 5 ft |
| Minimum Fan Speed | 1,725 RPM |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Nameplate Voltage | 230/460V AC |
| Motor Frame Designation | 71 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Blower, Forward Curve, 9 7/8 in, PLASTEC, Mfr# S14XT4P050
$2973,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 9 7/8 in, Airflow @ 0.250 in SP 250 cfm, Airflow @ 0.500 in SP 300 cfm, Airflow @ 0.750 in SP 400 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.