| Property | Value |
|---|---|
| Booster Pump Type | Booster Pump |
| Item | Booster Pump |
| HP - Pumps | 2 hp |
| Voltage - Pumps | 115/230V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Outlet Size - Pumps | 1-1/4 in NPT |
| Number of Stages - Pumps | 1 |
| Max. Pressure - Pumps | 45 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| Frame | NEMA 56J |
| GPM @ 40 PSI | 57 gpm |
| Motor RPM | 3450 |
| Motor Type | ODP |
| Impeller Type | Closed |
| Motor Enclosure | Open Dripproof (ODP) |
| Housing Material | Cast iron |
| Motor Ambient Temp. Rating | 65 Degrees C/149 Degrees F |
| HP | 2 |
| Inlet | 1-1/2 |
| Bearing Type | Ball |
| Inlet (In.) | 1-1/2 FNPT |
| Wetted Materials | Brass,CI,416 SS,Buna N,Carbon,Silicon Carbide,BR |
| GPM @ 35 PSI | 68 gpm |
| Duty | Continuous |
| GPM @ 30 PSI | 77 gpm |
| Includes | 1/4 in Drain Plug |
| Manufacturers Warranty Length | 1 yr |
| Seal Material | Buna-N, Carbon, Silicone Carbide, Stainless Steel |
| Width | 8 1/4 in |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Phase | Single |
| Max. Pressure | 45 psi |
| Stages | 1 |
| GPM @ 50 PSI | 0 gpm |
| GPM @ 25 PSI | 79 gpm |
| Hz | 60 |
| Amps | 13.5 A |
| Agency Compliance | CSA, CUS, UL Listed |
| Length | 15 5/8 in |
| Height | 3 5/16 in |
| Impeller Material | Brass |
| Max. Case Pressure | 100 psi |
| Voltage | 115/230 |
| Outlet | 1-1/4 |
| Overall Length | 15.63 in |
| Overall Width | 8.25 in |
| Overall Height | 9.5 in |
| Standards | CSAus Listed |
| Intake and Discharge Size | 1 1/2 in , 1 1/4 in |
| Series Family | 103 |
| Compatible Intake Pipe Size | 1 1/2 in |
| Intake Size | 1 1/2 in |
| Flow Rate @ 20 psi | 86 gpm |
| Nominal Voltage | 115/230V AC |
| Feet of Head (Minimum) | 23 ft of head |
| Intake Type | NPT |
| Pressure Boost (Maximum) | 45 psi |
| Nameplate Voltage | 230V AC |
| Minimum Flow Rate | 1.5 gpm |
| Priming | Manual |
| Shut Off Pressure (Maximum) | 45 psi |
| Maximum Media Temperature | 200 Degrees F |
| Flow Rate @ 30 psi | 77 gpm |
| Manufacturer Warranty Length | 1 yr |
| Flow Rate @ 10 psi | 110 gpm |
| Compatible with Media Type | Clear Water Only |
| Maximum Feet of Head | 105 ft of head |
| For Use With Potable Systems | No |
| Wetted Material | 416 Stainless Steel, Brass, Bromine, Buna-N, Cast Iron, Silicon Carbide |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Pump Housing Material | Cast Iron |
| Discharge Type | NPT |
| Series | CJ |
| Mounting Orientation | Horizontal |
| Maximum RPM | 3,450 RPM |
| Horsepower | 2 hp |
| Flow Rate @ 40 psi | 57 gpm |
| Maximum Flow Rate | 80 gpm |
| Suction Lift (Maximum) | 25 ft |
| Case Pressure (Maximum) | 100 psi |
| Number of Stages | 1 |
| For Use With Systems | Non-Potable |
| Frequency | 60 Hz |
| Pumping Application | City Water Mains, Private Water Systems |
| Minimum Media Temperature | 34 Degrees F |
| Duty Cycle | Continuous |
| Motor Enclosure Type | ODP |
| Impeller Design | Closed |
| Motor Frame Designation | 56J NEMA |
| Compatible Discharge Pipe Size | 1 1/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Booster Pump, 2 hp, 120/240V AC, 1 Phase, 1-1/2 in NPT Inlet Size, 1 Stage, 45 psi Max Pressure, Flint & Walling, Mfr#: CJ103201
$1211.4
Free shipping will be applied on orders over $50
Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 2 hp, Nameplate Voltage 230V AC, Flow Rate @ 10 psi 110 gpm, Flow Rate @ 20 psi 86 gpm, Flow Rate @ 30 psi 77 gpm, Flow Rate @ 40 psi 57 gpm, Shut Off Pressure (Maximum) 45 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 13.5 A, Case Pressure (Maximum) 100 psi
9999 in stock
Subtotal:
$1211.4
You must be logged in to post a review.
Reviews
There are no reviews yet.