Item | Brake |
For Use With | 4Z384, 4Z394, 6Z404, 6Z405 |
Type | Magnetic Disc |
Length (In.) | 5.5 in |
Shaft Dia. (In.) | 5/8 in |
Coil Volts | 230/460V AC |
Static Torque (Ft.-Lb.) | 1.5 |
Enclosure | Dripproof |
Max. RPM | 3,450 RPM |
Service Factor | 1 |
Converts | Converts Standard TEFC Motor into a TEFC Brake Motor |
Ambient (C) | 40 Degrees C |
Max. HP @ 3450 RPM | 3/4 hp |
Agency Compliance | CSA |
Inrush Amps | 0.86/0.43 |
Includes | Hardware |
Brake Mouting Position | Horizontal |
Mounts On | Most Totally Enclosed Fan-Cooled Dayton General Purpose Motors And Many Right-Angle Gearmotors |
Function | Spring Set Brake With Automatic Reset Release |
Max. HP @ 1725 RPM | 1/3 hp |
Features | Easily Installed |
Application | Stops and Holds Rotating Loads on Motors |
Power Lead Length (In.) | 18 |
Amps Holding | 0.05/0.026 |
Series | 50 Series |
Hz | 60 |
Duty | Continuous |
Voltage @ 60 Hz | 230/460 |
Dia. (In.) | 6 1/2 in |
Lever Type | Manual Release |
Phase | Single |
Finish | Gray Enamel Paint |
Overall Length | 5.5 in |
Outside Diameter | 6.5 in |
Standards | CSA Certified |
Holding Current | 0.05/0.026 A |
Shaft Diameter | 5/8 in |
Inrush Current | 0.86/0.43 A |
Mounting Orientation | Horizontal |
Continuous Duty | Yes |
Maximum Ambient Temperature | 40 Degrees C |
Clutch/Brake Type | Magnetic Disc |
Housing Material Finish | Gray Enamel Paint |
Static Torque | 1.5 ft-lb |
Maximum Speed | 3,450 RPM |
Lever Release | Manual |
Frequency | 60 Hz |
Operating Voltage | 230/460V AC |
Enclosure Type | Dripproof |
Coil Voltage | 230/460V AC |
Horsepower @ RPM | 1/3 hp @ 1725 RPM, 3/4 hp @ 3450 RPM |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Brake, Magnetic Disc, Torque 1.5 Ft-Lb, DAYTON, Mfr# 2LYV2
$532,99
-$79.04 / ea
with subscription
Free shipping will be applied on orders over $50
Brake, Clutch/Brake Type Magnetic Disc, Coil Voltage 230/460V AC, Operating Voltage 230/460V AC, Enclosure Type Dripproof, Static Torque 1.5 ft-lb, Horsepower @ RPM 1/3 hp @ 1725 RPM, 3/4 hp @ 3450 RPM, Shaft Diameter 5/8 in, Maximum Speed 3,450 RPM, Mounting Location Most Totally Enclosed Fan-Cooled Dayton General Purpose Motors and Many Right-Angle Gearmotors, For Use With 4Z384, 4Z394, 6Z404, 6Z405, Includes Hardware, Continuous Duty Yes, Outside Diameter 6.5 in, Overall Length 5.5 in
9999 in stock
Must order in multiples of 1
Subtotal:
$532.99
You must be logged in to post a review.
Reviews
There are no reviews yet.