Item | Brake |
Type | End Mount Disc |
Length (In.) | 4 in |
Shaft Dia. (In.) | 7/8 in |
Width (In.) | N/A |
Coil Volts | 115-208/230V AC or 95/174-190V AC |
Static Torque (Ft.-Lb.) | 10 |
NEMA/IEC Frame | 143/145TC |
Enclosure | Dripproof |
Max. RPM | 3,600 RPM |
Phase | Single |
Function | Stops And Holds A Motor Shaft From Rotating |
Lever Type | Manual Release |
Agency Compliance | CSA, ROHS Compliant |
Converts | Motor to a Brake Motor |
Brake Mouting Position | Horizontal |
Includes | Brake and Instruction Manual |
Service Factor | 1.4 |
Duty | Continuous |
Hz | 60/50 |
Max. HP @ 3450 RPM | 3 hp |
Application | Brake Attaches to the Accessory End of a Motor to Stop and Hold the Motor Shaft |
Ambient (C) | 40 Degrees C |
Power Lead Length (In.) | 18 |
Max. Bore (In.) | 7/8 in |
Inrush Amps | 11.5/5.8 |
Finish | Red Primer |
Keyseat Size (In.) | 3/16 x 3/32 |
Dia. (In.) | 6 1/2 in |
Series | 5602 Style |
Max. HP @ 1725 RPM | 2 hp |
Mounts On | 143/145TC Motor Flange |
Voltage @ 60 Hz | 115/208-230 |
Voltage @ 50 Hz | 95/174-190 |
Amps Holding | 0.5/0.3 |
Overall Width | Not Applicable |
Outside Diameter | 6.5 in |
Standards | CSA Certified, ROHS Compliant |
Overall Length | 4 in |
Holding Current | 0.3/0.2 A |
Maximum Ambient Temperature | 40 Degrees C |
Continuous Duty | Yes |
Coil Voltage | 115/208-230V AC |
Horsepower @ RPM | 1 hp @ 3450 RPM, 1/2 hp @ 1725 RPM |
Static Torque | 3 ft-lb |
Shaft Diameter | 5/8 in |
Housing Material Finish | Red Primer |
Keyway Depth | 3/32 in |
Maximum Speed | 3,600 RPM |
Keyway Width | 3/16 in |
Lever Release | Manual |
Clutch/Brake Type | End Mount Disc |
Enclosure Type | Dripproof |
Frequency | 50 Hz, 60 Hz |
Mounting Orientation | Horizontal |
Operating Voltage | 115/208-230V AC |
Inrush Current | 6.7/3.4 A |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Brake, End Mount, Torque 10 Ft-Lb, DAYTON, Mfr# 5URA2
$473,99
-$15.19 / ea
with subscription
Free shipping will be applied on orders over $50
Brake, Clutch/Brake Type End Mount Disc, Coil Voltage 115/208-230V AC, Operating Voltage 115/208-230V AC, Enclosure Type Dripproof, Static Torque 3 ft-lb, Horsepower @ RPM 1 hp @ 3450 RPM, 1/2 hp @ 1725 RPM, Shaft Diameter 5/8 in, Maximum Speed 3,600 RPM, Mounting Location 56C Motor Flange, Includes Brake and Instruction Manual, Continuous Duty Yes, Outside Diameter 6.5 in, Overall Length 4 in, Overall Width Not Applicable, Phase Single, Service Factor 1.4
9999 in stock
Must order in multiples of 1
Subtotal:
$473.99
You must be logged in to post a review.
Reviews
There are no reviews yet.