Cable Tester, Touch Screen Display, Fluke Networks, Mfr#: DSX2-5000

Not eligible for promotion

Cable Tester

Copper Cable Qualification

5. 7 in LCD display with a projected capacitance touchscreen

Touchscreen

RJ45

(2) AC Chargers, (2) DSX-5000 CableAnalyzer Modules, (2) Hand Straps, (2) Headsets, (2) Shoulder Straps, (2) Universal Couplers, Carrying Case, Integrated Wi-Fi, USB Interface Cable, Versiv Mainframe u0026 Remote

Included

Yes

Yes

Yes

Yes

No

Yes

Yes

No

Yes

Yes

No

No

Yes

Yes

Yes

Yes

Yes

No

Yes

0. 1 m or 1 ft, 0. 1 Ω, 1 ns

ANSI/TIA-568.2-D, IEC, ISO

Yes

15 V DC

No

Cable Network Tester

750 nsec

40 GBps

12,000

2,600 ft

Digital Display

Yes

540 ohm

5.7 in

Lithium Ion

113 Degrees F

32 Degrees F

90 %

Opens, Shorts

Yes

CAT6A/Class EA Channel, CAT6A/Class EA Permanent Link

LCD

Cable Certification, Endpoint Testing, Wire Mapping

CAT3, CAT4, CAT5, CAT5e, CAT6, CAT6A, CAT8

Yes

32°F to 113°F (0°C to 45°C)

Meets IEEE 802. 11 a/b/g/n; dual band (2. 4 GHz and 5 GHz)

Lithium ion battery pack, 7. 2 V

150 m (490 ft) || 800 m (2600 ft), 750 ns || 4000 ns, 0 ns to 100 ns, 0 Ω to 540 Ω

Category 3, 4, 5, 5e, 6, 6A, 8 per ANSI/TIA-568. 2-D

0 % to 70 %, 95°F to 113 °F (35°C to 45°C) || 0 % to 90 %, 32°F to 95 °F (0°C to 35°C)

-14°F to +140°F (-10°C to +60°C)

Optional Plug type: Tera || Plug type: shielded RJ45

Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage

Tester off: 4 hours to charge from 10 % capacity to 90 % capacity.

13,123 ft (4,000 m) || 10,500 ft (3,200 m) with ac adapter

DSX-5000: 1000 MHz || DSX-8000: 2000 MHz;

Jack type: shielded RJ45 || Optional Jack type: Tera, GG45

High impact plastic with shock absorbing overmold

CSA 22. 2 No. 61010, IEC 61010-1 3 || Edition

Main Versiv unit with DSX module and battery installed: 2. 625 in x 5. 25 in x 11. 0 in (6. 67 cm x 13. 33 cm x 27. 94 cm)

± (1 Ω + 1 %), ± 10 ns, ± (2 ns + 2 %) || ± (2 ns + 2 %); 0 ns to 750 ns || ± (2 ns + 4 %); 750 ns to 4000 ns, ± (0. 3 m + 4 %); 150 m to 800 m || ± (0. 3 m + 2 %); 0 m to 150 m || ± (0. 3 m + 2 %)

Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Pair-to-Pair Resistance Unbalance, Pair Resistance Unbalance, Insertion Loss (Attenuation), Return Loss (RL), Common Mode Return loss (CMRL), Near End Crosstalk (NEXT), Far End Crosstalk (FEXT), Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien NEXT (PS ANEXT), Power Sum Alien Attenuation NEXT Ratio Far End (PS AACR-F), Common Mode to Differential Mode NEXT (CDNEXT),Transverse Conversion Loss (TCL), Equal Level Transverse Conversion Transfer Loss (ELTCTL)

|| . Full 2-way Autotest of Category 8: || . Full 2-way Autotest of Category 6A/Class E || . Full 2-way Autotest of Category 6A/Class EA: || : || : Full 2-way Autotest of Category 5e or 6/Class D or E:

Less than 10 minutes to rated accuracy following an overvoltage. Referencing is required after repeated or prolonged overvoltage.

Random, 2 g, 5 Hz-500 Hz

, F, F || TIA Category 3, 4, 5, 5e, 6, 6A, 8: 100 Ω ISO/IEC Class C, D, E, E || and I/II: 100 Ω and 120 Ω

Class C and D, E, E || , F, F || and I/II certification per ISO/IEC

1 m drop test with and without module and adapter

8 hours

United States

1