HP | 1 hp |
Item | Chemical Resistant Centrifugal Pump |
Housing Material | Polypropylene |
Phase | Single |
Voltage | 115/230 |
Max. GPM @ Head | 55 gpm @ 10 ft |
Max. Head | 79 ft |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 38 gpm @ 50 ft |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Open Dripproof |
Volute Material | Polypropylene |
GPM of Water @ 40 Ft. of Head | 44 |
Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
Best Efficiency Range GPM @ Head | 21 to 50 gpm @ 65 to 25 ft |
Inlet Pressure | 75 psi |
GPM of Water @ 15 Ft. of Head | 54 |
GPM of Water @ 30 Ft. of Head | 48 |
GPM of Water @ 10 Ft. of Head | 55 |
Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
Manufacturers Warranty Length | 1 yr |
Max. Fluid Viscosity | 100 SUS |
Service Factor | 1.4 |
GPM of Water @ 70 Ft. of Head | 14 |
Impeller Type | Closed |
Width | 7 5/8 in |
Port Rotation | None |
Height | 7 1/2 in |
Shaft Material | Stainless Steel |
Min. GPM @ Head | 14 gpm @ 70 ft |
Max. Dia. Solids | 1/4 in |
GPM of Water @ 60 Ft. of Head | 28 |
Length | 16 11/32 in |
Max. Liquid Temp. | 140 Degrees F |
GPM of Water @ 20 Ft. of Head | 53 |
Motor RPM | 3,450 RPM |
GPM of Water @ 50 Ft. of Head | 38 |
Drain Plug | Yes |
Impeller Material | Polypropylene |
Agency Compliance | c UL us |
Max. Case Pressure | 100 psi |
Amps | 14.4/7.2 |
Seal Type | Mechanical |
Max. Specific Gravity | 1.0 |
Hz | 60 |
GPM of Water @ 25 Ft. of Head | 50 |
NEMA/IEC Frame | 56J |
Bearing Type | Ball |
Includes | Manual |
Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Duty | Continuous |
Screw Material | Stainless Steel |
Motor Type | Capacitor Start Induction |
Overall Length | 16.3 in |
Standards | cULus Listed |
Overall Width | 7.6 in |
Overall Height | 7.5 in |
Motor Speed (Maximum) | 3,450 RPM |
Media Temperature (Minimum) | Not Applicable |
Cord Length | Not Applicable |
Discharge Rotation | None |
Solid Diameter (Maximum) | 0.25 in |
Intake Pipe Type | NPT |
Duty Cycle | Continuous |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Discharge Port | 1 1/2 in NPT |
Current | 14.4 or 7.2 A |
Intake Pipe Size | 1 1/2 in |
Viscosity (Maximum) | 100 SUS |
Flow Rate @ 15 ft of Head (Maximum) | 54 gpm |
Impeller Design | Closed |
Discharge Pipe Type | NPT |
Flow Rate @ 25 ft of Head (Maximum) | 50 gpm |
Shaft Outer Diameter | 5/8 in |
Flow Rate @ 30 ft of Head (Maximum) | 48 gpm |
Media Temperature (Maximum) | 140 Degrees F |
Ambient Temperature (Maximum) | 104 Degrees F |
Flow Rate (Minimum) | 14 gpm |
Horsepower (Maximum) | 1 hp |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Feet of Head (Maximum) | 79 ft |
Suction Port | 1 1/2 in NPT |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Specific Gravity (Maximum) | 1 |
Ambient Temperature (Minimum) | Not Applicable |
Frequency | 60 Hz |
Discharge Pipe Size | 1 1/2 in |
Flow Rate @ 20 ft of Head (Maximum) | 53 gpm |
Compatible Motor Frame | 56J NEMA |
Best Efficiency Head | 50 ft |
Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Nameplate Voltage | 115/230V AC |
Flow Rate (Maximum) | 55 gpm |
For Use With Potable Systems | No |
Flow Rate @ 60 ft of Head (Maximum) | 28 gpm |
Shut Off Pressure (Maximum) | 72 ft of head |
Priming | Manual |
Flow Rate @ 70 ft of Head (Maximum) | 14 gpm |
Case Pressure (Maximum) | 100 psi |
Flow Rate @ 40 ft of Head (Maximum) | 44 gpm |
Flow Rate @ 10 ft of Head (Maximum) | 55 gpm |
Electrical Connection Type | Hardwired |
Best Efficiency Flow | 38 gpm |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Centrifugal Pump, 1 HP, 1 Ph, 115/230V, DAYTON, Mfr# 2YER7
$754,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 79 ft, Flow Rate (Maximum) 55 gpm, Horsepower (Maximum) 1 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Single, Shut Off Pressure (Maximum) 72 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 55 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$754.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.