HP | 1/3 hp |
Item | Chemical Resistant Centrifugal Pump |
Housing Material | Polypropylene |
Phase | Single |
Voltage | 115/230 |
Max. GPM @ Head | 22 gpm @ 10 ft |
Max. Head | 62 ft |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 18 gpm @ 30 ft |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Open Dripproof |
GPM of Water @ 40 Ft. of Head | 10 |
Best Efficiency Range GPM @ Head | 7 to 16 gpm @ 46 to 24 ft |
Bearing Type | Ball |
Seal Type | Mechanical |
Drain Plug | Yes |
Impeller Type | Closed |
GPM of Water @ 10 Ft. of Head | 22 |
GPM of Water @ 50 Ft. of Head | 7 |
Max. Liquid Temp. | 140 Degrees F |
Width | 7 5/8 in |
Length | 15 in |
Amps | 7.5/3.8 |
Min. GPM @ Head | 2 gpm @ 60 ft |
Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Motor RPM | 3,450 RPM |
Screw Material | Stainless Steel |
Duty | Continuous |
GPM of Water @ 60 Ft. of Head | 2 |
Max. Specific Gravity | 1.0 |
Service Factor | 1.75 |
Agency Compliance | c UL us |
GPM of Water @ 25 Ft. of Head | 17 |
Shaft Material | Stainless Steel |
GPM of Water @ 30 Ft. of Head | 15 |
Includes | Manual |
Manufacturers Warranty Length | 1 yr |
Port Rotation | None |
NEMA/IEC Frame | 56J |
Height | 7 1/2 in |
Max. Dia. Solids | 1/4 in |
Max. Case Pressure | 100 psi |
GPM of Water @ 15 Ft. of Head | 20 |
Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
Inlet Pressure | 75 psi |
Volute Material | Polypropylene |
Hz | 60 |
Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
Max. Fluid Viscosity | 100 SUS |
Impeller Material | Polypropylene |
GPM of Water @ 20 Ft. of Head | 19 |
Motor Type | Capacitor Start Induction |
Overall Length | 15 in |
Standards | cULus Listed |
Overall Width | 7.6 in |
Overall Height | 7.5 in |
Ambient Temperature (Minimum) | Not Applicable |
Shaft Outer Diameter | 5/8 in |
Specific Gravity (Maximum) | 1 |
Flow Rate @ 30 ft of Head (Maximum) | 15 gpm |
Priming | Manual |
Discharge Port | 1 1/2 in NPT |
Flow Rate (Maximum) | 22 gpm |
Motor Speed (Maximum) | 3,450 RPM |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Solid Diameter (Maximum) | 0.25 in |
Discharge Pipe Type | NPT |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Cord Length | Not Applicable |
Electrical Connection Type | Hardwired |
Viscosity (Maximum) | 100 SUS |
Flow Rate @ 40 ft of Head (Maximum) | 10 gpm |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Suction Port | 1 1/2 in NPT |
Discharge Pipe Size | 1 1/2 in |
Intake Pipe Type | NPT |
Impeller Design | Closed |
Feet of Head (Maximum) | 62 ft |
Flow Rate (Minimum) | 2 gpm |
Nameplate Voltage | 115/230V AC |
Best Efficiency Flow | 18 gpm |
Discharge Rotation | None |
Best Efficiency Head | 30 ft |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Media Temperature (Maximum) | 140 Degrees F |
Flow Rate @ 15 ft of Head (Maximum) | 20 gpm |
For Use With Potable Systems | No |
Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Flow Rate @ 20 ft of Head (Maximum) | 19 gpm |
Compatible Motor Frame | 56J NEMA |
Intake Pipe Size | 1 1/2 in |
Flow Rate @ 10 ft of Head (Maximum) | 22 gpm |
Media Temperature (Minimum) | Not Applicable |
Case Pressure (Maximum) | 100 psi |
Frequency | 60 Hz |
Duty Cycle | Continuous |
Shut Off Pressure (Maximum) | 62 ft of head |
Ambient Temperature (Maximum) | 104 Degrees F |
Horsepower (Maximum) | 1/3 hp |
Current | 7.5 or 3.8 A |
Flow Rate @ 25 ft of Head (Maximum) | 17 gpm |
Flow Rate @ 60 ft of Head (Maximum) | 2 gpm |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Centrifugal Pump, 1/3 HP, 1 Ph, 115/230V, DAYTON, Mfr# 2YER2
$655,99
-$19.65 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 62 ft, Flow Rate (Maximum) 22 gpm, Horsepower (Maximum) 1/3 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Single, Shut Off Pressure (Maximum) 62 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 22 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$655.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.