| Item | Chemical Resistant Centrifugal Pump |
| HP | 1/2 hp |
| Housing Material | Noryl |
| Phase | Single |
| Voltage | 115/208-230 |
| Max. GPM @ Head | 26 gpm @ 10 ft |
| Max. Head | 68 ft |
| Best Efficiency GPM @ Head | 20 gpm @ 35 ft |
| Inlet | 1-1/2 in NPT |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Max. Fluid Viscosity | 100 SUS |
| Max. Case Pressure | 100 psi |
| Max. Dia. Solids | 1/4 in |
| Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
| Motor RPM | 3,450 RPM |
| Width | 7 5/8 in |
| Amps | 8.6/4.0-4.3 |
| GPM of Water @ 30 Ft. of Head | 19 |
| GPM of Water @ 25 Ft. of Head | 21 |
| Max. Liquid Temp. | 180 Degrees F |
| Impeller Type | Closed |
| Wetted Materials | Carbon, Ceramic, Noryl, Viton |
| Max. Specific Gravity | 1.0 |
| GPM of Water @ 50 Ft. of Head | 11 |
| Duty | Continuous |
| Inlet Pressure | 75 psi |
| Drain Plug | Yes |
| Height | 7 1/2 in |
| Impeller Material | Noryl |
| GPM of Water @ 40 Ft. of Head | 14 |
| GPM of Water @ 60 Ft. of Head | 9 |
| Agency Compliance | c UL us |
| GPM of Water @ 10 Ft. of Head | 26 |
| Min. GPM @ Head | 9 gpm @ 60 ft |
| Volute Material | Noryl |
| Best Efficiency Range GPM @ Head | 11 to 20 gpm @ 50 to 28 ft |
| Hz | 60 |
| Service Factor | 1.15 |
| GPM of Water @ 15 Ft. of Head | 24 |
| Length | 15 7/8 in |
| NEMA/IEC Frame | 56J |
| Port Rotation | None |
| Seal Material | Carbon, Ceramic, Noryl, Viton |
| Bearing Type | Ball |
| Includes | Manual |
| Shaft Material | Stainless Steel |
| Seal Type | Mechanical |
| Manufacturers Warranty Length | 1 yr |
| Screw Material | Stainless Steel |
| GPM of Water @ 20 Ft. of Head | 23 |
| Motor Type | Capacitor Start Induction |
| Standards | cULus Listed |
| Overall Height | 7.5 in |
| Overall Width | 7.6 in |
| Overall Length | 15.9 in |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 60 ft of Head (Maximum) | 9 gpm |
| Nameplate Voltage | 115/208-230V AC |
| Flow Rate (Maximum) | 26 gpm |
| Discharge Rotation | None |
| Media Temperature (Minimum) | Not Applicable |
| Priming | Manual |
| Compatible Motor Frame | 56J NEMA |
| Viscosity (Maximum) | 100 SUS |
| Electrical Connection Type | Hardwired |
| Discharge Pipe Type | NPT |
| Suction Port | 1 1/2 in NPT |
| Duty Cycle | Continuous |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Discharge Port | 1 1/2 in NPT |
| Intake Pipe Type | NPT |
| Shaft Outer Diameter | 5/8 in |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 40 ft of Head (Maximum) | 14 gpm |
| Horsepower (Maximum) | 1/2 hp |
| Flow Rate @ 30 ft of Head (Maximum) | 19 gpm |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| For Use With Potable Systems | No |
| Intake Pipe Size | 1 1/2 in |
| Impeller Design | Closed |
| Flow Rate @ 10 ft of Head (Maximum) | 26 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 24 gpm |
| Flow Rate (Minimum) | 9 gpm |
| Feet of Head (Maximum) | 68 ft |
| Flow Rate @ 20 ft of Head (Maximum) | 23 gpm |
| Specific Gravity (Maximum) | 1 |
| Cord Length | Not Applicable |
| Current | 8.6 or 4 to 4.3 A |
| Flow Rate @ 25 ft of Head (Maximum) | 21 gpm |
| Case Pressure (Maximum) | 100 psi |
| Best Efficiency Flow | 20 gpm |
| Best Efficiency Head | 35 ft |
| Media Temperature (Maximum) | 180 Degrees F |
| Wetted Material | Carbon, Ceramic, Noryl, Viton |
| Solid Diameter (Maximum) | 0.25 in |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Frequency | 60 Hz |
| Shut Off Pressure (Maximum) | 68 ft of head |
| Discharge Pipe Size | 1 1/2 in |
| Motor Speed (Maximum) | 3,450 RPM |
| Ambient Temperature (Minimum) | Not Applicable |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
CentrifugalPump, 1/2hp, 1 Ph, 115/208-230V, DAYTON, Mfr# 2YEV5
$745,99
-$22.38 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 68 ft, Flow Rate (Maximum) 26 gpm, Horsepower (Maximum) 1/2 hp, Housing Material Noryl, Impeller Design Closed, Impeller Material Noryl, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 180 Degrees F, Phase Single, Shut Off Pressure (Maximum) 68 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 26 gpm, Flow Rate @ 15 ft of Head (Maximum) 24 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$745.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.