| Chemical Metering Pump Type | Peristaltic |
| Flow Rate Output Control | Fixed |
| Max. Flow (gpd) - Pumps | 30.00 gpd |
| Voltage | 120 |
| Max. Pressure - Pumps | 80 psi |
| Voltage - Pumps | 120V AC |
| Phase - Pumps | 1 |
| Max. Viscosity - Pumps | 50 cps |
| HP - Pumps | 1/40 hp |
| Reproducibility - Pumps | +/-2.0% |
| Item | Chemical Metering Pump |
| Cord Length | 10 ft |
| Number of Feeds | Single Head |
| Width | 3 3/4 in |
| Max. Pressure | 80 psi |
| Hz | 60 |
| Head and Fitting Material - Pumps | Polycarbonate/Polypropylene/PVC |
| Features | Accepts A Signal From A Water Meter, Controllers or Other Device, Injection (1:128) For Water Flow Up to 2.7 gpm, Providing A Dry Contact At A Rate of 1 or 10 ppg or 1 ppl, Signal Repeater Relay That Can Repeat The Incoming Signal to Another Stennicator, Standby Setting Stops Pump From Injecting While Continuing to Send The Water Meters Pulse Output to The Controller, When Utilizing A House Controller |
| Height | 5 1/2 in |
| Max. Viscosity | 50 CPS |
| Max. Flow (GPD) - Pumps | 30.00 gpd |
| Length | 6 in |
| Min. Flow Rate | 30.0 gpd |
| Self-Priming | Yes |
| Standards | cULus Listed |
| Suction Lift | 25 ft |
| Pump Type | Peristaltic |
| Reproducibility | +/-2.0% |
| Includes | 20 ft Roll of Suction/Discharge Tubing, Pump Tube, Duckbill Check Valve, Weighted Suction Line Strainer, (3) 1/4 in Connecting Nuts, (3) 1/4 in Ferrules |
| Motor RPM | 60 RPM |
| cc/Min. | 78.85 cc/min |
| Body Material | Polycarbonate |
| Max. Flow Rate | 30 gpd |
| Tubing Material | Santoprene |
| Seals and O-Rings - Pumps | Santoprene |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Tubing Material - Peristaltic Pumps | Santoprene |
| Phase | Single |
| Turn Down Ratio | Not Applicable |
| Overall Height | 5.4 in |
| Overall Width | 5.9 in |
| Overall Length | 4.4 in |
| Seal Material | Santoprene |
| Fitting Material | Polypropylene, PVC |
| Motor Type | Brushless DC |
| Electrical Connection Type | Plug-In |
| Motor Speed (Maximum) | 60 RPM |
| Control Programs | Contacting Head Water Meter |
| Flow Rate (Maximum) | 30 gpd |
| Nameplate Voltage | 120V AC |
| Intake Connection Type | Tube |
| Housing Material | Polycarbonate |
| Intake Connection Size | 1/4 in |
| Roller Material | Polyethylene |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Flow Rate (Minimum) | Not Applicable |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hypochlorite 10%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Water |
| Head Material | Polyethylene |
| Motor Mounting Type | Not Applicable |
| Priming | Self-Priming |
| Motor Enclosure | Totally Enclosed |
| Metering Reproducibility | +/-2.0% |
| Duty Cycle | Continuous |
| Degassing Valve Included | No |
| Discharge Connection Type | Tube |
| Horsepower (Maximum) | 1/40 hp |
| Discharge Connection Size | 1/4 in |
| Pressure (Maximum) | 80 psi |
| Media Temp. Range | 32 Degrees F to 104 Degrees F |
| Viscosity (Maximum) | 50 cps |
| Frequency | 60 Hz |
| Media Temperature (Maximum) | 104 Degrees F |
| Media Temperature (Minimum) | 32 Degrees F |
| Max. Discharge Pressure | 80 psi |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Econ Stennicator 1:128 ratio 2.7 oz/min 80 Psi, STENNER, Mfr# E20MH81S6G1
$437,99
Free shipping will be applied on orders over $50
Chemical Metering Pump
9999 in stock
Must order in multiples of 1
Subtotal:
$437.99
You must be logged in to post a review.
Reviews
There are no reviews yet.