| Max. Viscosity | 1500 cps |
| Max. Pressure - Pumps | 25 psi |
| Max. Flow (gpd) - Pumps | 50.00 gpd |
| Max. Flow Rate | 40 gpd |
| Head and Fitting Material | Polycarbonate |
| Length | 10 5/8 in |
| Motor HP | 1/30 |
| Max. Flow (GPD) - Pumps | 50.00 gpd |
| Flow Rate Output Control | Adjustable |
| Phase - Pumps | 1 |
| Motor RPM | 26 RPM |
| Width | 5 5/16 in |
| Cord Length | 6 ft |
| Includes | 20 ft Roll of Suction/Discharge Tubing, Pump Tube, Duckbill Check Valve 100 psi, Mounting Bracket, Weighted Suction Line Strainer, (2) Additional Latches, (3) Connecting Nuts, (3) 1/4 in Ferrules |
| Reproducibility | +/-2.0% |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Number of Feeds | Single Head |
| Pump Type | Peristaltic |
| Features | Adjustable Single Head, Nonclogging Design, Valveless |
| Reproducibility - Pumps | +/-2.0% |
| HP - Pumps | 1/30 hp |
| Self-Priming | Yes |
| Head and Fitting Material - Pumps | Polycarbonate/Polypropylene/PVC |
| Chemical Metering Pump Type | Peristaltic |
| Tubing Material | Santoprene |
| Tubing Material - Peristaltic Pumps | Santoprene |
| Voltage - Pumps | 115V AC |
| Height | 6 in |
| Max. Pressure | 25 psi |
| Turn Down Ratio | 20:1 |
| Voltage | 115 |
| Body Material | Polycarbonate |
| Standards | IAPMO Listed Conforms to Standard NSF/ANSI 61 and 372, INTERTEK/ETL Sanitation Listed Conforms to Standard NSF/ANSI 50 |
| Suction Lift | 25 ft |
| Min. Flow Rate | 2.5 gpd |
| Item | Chemical Metering Pump |
| Turn Down Ratio - Pumps | 20:1 |
| Max. Viscosity - Pumps | 1,500 cps |
| Overall Width | 5.3 in |
| Overall Length | 10.6 in |
| Overall Height | 6 in |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hypochlorite 10%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Water |
| Max. Discharge Pressure | 25 psi |
| Metering Reproducibility | +/-2.0% |
| Media Temp. Range | 32 Degrees F to 125 Degrees F |
| Media Temperature (Maximum) | 125 Degrees F |
| Frequency | 60 Hz |
| Motor Type | Shaded Pole |
| Head Material | Polyethylene, Polypropylene |
| Discharge Connection Type | Tube |
| Degassing Valve Included | No |
| Intake Connection Size | 1/4 in |
| Motor Speed (Maximum) | 26 RPM |
| Media Temperature (Minimum) | 32 Degrees F |
| Electrical Connection Type | Plug-In |
| Ambient Temperature (Maximum) | 125 Degrees F |
| Motor Mounting Type | Not Applicable |
| Viscosity (Maximum) | 1,500 cps |
| Priming | Self-Priming |
| Flow Rate (Maximum) | 50 gpd |
| Housing Material | Polycarbonate |
| Pressure (Maximum) | 25 psi |
| Flow Rate (Minimum) | 2.5 gpd |
| Discharge Connection Size | 1/4 in |
| Fitting Material | Polypropylene, PVC |
| Horsepower (Maximum) | 1/30 hp |
| Control Programs | Manual Control |
| Nameplate Voltage | 120V AC |
| Duty Cycle | Continuous |
| Phase | Single |
| Intake Connection Type | Tube |
| Roller Material | Bronze |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Peristaltic Adj Rate 45M5 50GPD 25Psi 1/4"W, STENNER, Mfr# 45MJL5A1STG1
$613,99
-$18.42 / ea
with subscription
Free shipping will be applied on orders over $50
Chemical Metering Pump
9999 in stock
Must order in multiples of 1
Subtotal:
$613.99
You must be logged in to post a review.
Reviews
There are no reviews yet.