| Item | Controller |
| Input Voltage | 24V AC/DC |
| Output Type | Relay |
| Amps | 2 A |
| Number of Outputs | 24 |
| Clock | No |
| Display | 7 Segment LED |
| Number of Inputs | 24 |
| Depth | 5.47 in |
| Height | 4.17 in |
| Width | 6.1 in |
| Response Time | 35 µs turn-off, I2 to I5 input || 10 ms turn-on output || 10 ms turn-off output || 5 µs turn-on, I0, I1, I6, I7 fast input || 35 µs turn-on, other terminals input || 5 µs turn-off, I0, I1, I6, I7 fast input || 100 µs turn-off, other terminals input |
| Standards | EN/IEC 61010-2-201 || EN/IEC 60664-1 || EN/IEC 61131-2 |
| Electrical Durability | 100000 cycles AC-12, 120 V, 240 VA, resistive || 100000 cycles AC-12, 240 V, 480 VA, resistive || 300000 cycles AC-12, 120 V, 80 VA, resistive || 300000 cycles AC-12, 240 V, 160 VA, resistive || 100000 cycles AC-15, cos phi = 0.35 , 120 V, 60 VA, inductive || 100000 cycles AC-15, cos phi = 0.35 , 240 V, 120 VA, inductive || 300000 cycles AC-15, cos phi = 0.35 , 120 V, 18 VA, inductive || 300000 cycles AC-15, cos phi = 0.35 , 240 V, 36 VA, inductive || 100000 cycles AC-14, cos phi = 0.7 , 120 V, 120 VA, inductive || 100000 cycles AC-14, cos phi = 0.7 , 240 V, 240 VA, inductive || 300000 cycles AC-14, cos phi = 0.7 , 120 V, 36 VA, inductive || 300000 cycles AC-14, cos phi = 0.7 , 240 V, 72 VA, inductive || 100000 cycles DC-12, 24 V, 48 W, resistive || 300000 cycles DC-12, 24 V, 16 W, resistive || 100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms) || 300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms) |
| Resistance To Electrostatic Discharge | 8 kV in air EN/IEC 61000-4-2 || 4 kV on contact EN/IEC 61000-4-2 |
| Counting Input Number | 4 fast input (HSC mode) 100 kHz 32 bits |
| Discrete Input Logic | sink or source (positive/negative) |
| Reset Time | 1 s |
| Discrete Output Current | 2A |
| Discrete Output Number | 10 relay |
| Mounting Support | top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit |
| Exct Time For Event Task | 60 µs response time |
| Maximum Cable Distance Between Devices | shielded cable <10 m fast input || unshielded cable <30 m output || unshielded cable <30 m digital input || unshielded cable <1 m analog input |
| Resistance To Fast Transients | 2 kV EN/IEC 61000-4-4 power lines) || 2 kV EN/IEC 61000-4-4 relay output) || 1 kV EN/IEC 61000-4-4 I/O) || 1 kV EN/IEC 61000-4-4 Ethernet line) || 1 kV EN/IEC 61000-4-4 serial link) |
| Voltage State 0 Guaranteed | <= 5 V input |
| Minimum Load | 1 mA 5 V DC relay output |
| Transmission Rate | 1.2 to 115.2 kbit/s (115.2 kbit/s by default) 15-15 m RS485 || 1.2 to 115.2 kbit/s (115.2 kbit/s by default) 3-3 m RS232 || 480 Mbit/s USB |
| Operating Altitude | 0 to 6561.68 ft (0 to 2000 m) |
| Resistance To Magnetic Fields | 30 A/m 50/60 Hz EN/IEC 61000-4-8 |
| Storage Altitude | 0-3000 m |
| Electrical Connection | removable screw terminal block for inputs || removable screw terminal block for outputs || terminal block, 3 for connecting the 24 V DC power supply || connector, 4 for analogue inputs || mini B USB 2.0 connector for a programming terminal |
| Insulation | between input and internal logic 500 V AC || non-insulated between analogue input and internal logic || non-insulated between analogue inputs || between supply and ground 1500 V AC || between sensor power supply and ground 500 V AC || between input and ground 500 V AC || between output and ground 1500 V AC || between supply and internal logic 2300 V AC || between sensor power supply and internal logic 500 V AC || between output and internal logic 2300 V AC || between Ethernet terminal and internal logic 500 V AC || between supply and sensor power supply 2300 V AC |
| Mechanical Durability | 20000000 cycles relay output |
| Product Certifications | CSA || LR || ABS || IACS E10 || DNV-GL || RCM || cULus || EAC |
| Data Backed Up | 256 kB built-in flash memory backup of application and data |
| Memory capacity | 256 kB user application and data RAM 10000 instructions || 256 kB internal variables RAM |
| Backup Time | 1 year 25 °C by interruption of power supply) |
| Electromagnetic Emission | conducted emissions 79 dB??V/m QP/66 dB??V/m AV power lines (AC))0.15-0.5 MHz EN/IEC 55011 || conducted emissions 73 dB??V/m QP/60 dB??V/m AV power lines (AC))0.5-300 MHz EN/IEC 55011 || conducted emissions 120 to 69 dBµV/m QP power lines)10-150 kHz EN/IEC 55011 || conducted emissions 63 dB??V/m QP power lines)1.5-30 MHz EN/IEC 55011 || radiated emissions 40 dB??V/m QP class A 10 m)30-230 MHz EN/IEC 55011 || conducted emissions 79 to 63 dB??V/m QP power lines)150-1500 kHz EN/IEC 55011 || radiated emissions 47 dB??V/m QP class A 10 m)200-1000 MHz EN/IEC 55011 |
| Maximum Current Per Output Common | 4 A COM 2 || 7 A COM 0 || 7 A COM 1 |
| Clock Drift | <= 30 s/month 25-25 °C |
| Vibration Resistance | 3.5 mm 5-8.4 Hz symmetrical rail || 3.5 mm 5-8.4 Hz panel mounting || 1 gn 8.4-150 Hz symmetrical rail || 1 gn 8.4-150 Hz panel mounting |
| Resistance To Electromagnetic Fields | 10 V/m 80 MHz to 1 GHz EN/IEC 61000-4-3 || 3 V/m 1.4 GHz to 2 GHz EN/IEC 61000-4-3 || 1 V/m 2 to 2.7 GHz EN/IEC 61000-4-3 |
| Execution Time Per Instruction | 0.2 µs Boolean |
| Discrete Input Voltage | 24 V |
| Conversion Time | 1 ms per channel + 1 controller cycle time analog input |
| Configurable Filtering Time | 0 ms input || 3 ms input || 12 ms input |
| Regulation Loop | adjustable PID regulator up to 14 simultaneous loops |
| Pollution Degree | <= 2 |
| Power Supply Output Current | 0.52-0.52 A 5 V expansion bus || 0.16-0.16 A 24 V expansion bus |
| Permitted Overload On Inputs | +/- 30 V DC 5 min maximum)analog input || +/- 13 V DC permanent)analog input |
| Realtime Clock | with |
| Lsb Value | 10 mV |
| Communication Port Protocol | USB port USB - SoMachine-Network || non isolated serial link Modbus master/slave - RTU/ASCII or SoMachine-Network |
| Sensor Power Supply | 24-24 V DC 250 mA supplied by the controller |
| Integrated Connection Type | USB port mini B USB 2.0 || non isolated serial link serial 1 RJ45 RS485 || non isolated serial link serial 2 RJ45 RS232/RS485 |
| [Us] Rated Supply Voltage | 100 to 240 V AC |
| Surge Withstand | 2 kV power lines (AC) common mode EN/IEC 61000-4-5 || 2 kV relay output common mode EN/IEC 61000-4-5 || 1 kV I/O common mode EN/IEC 61000-4-5 || 1 kV shielded cable common mode EN/IEC 61000-4-5 || 0.5 kV power lines (DC) differential mode EN/IEC 61000-4-5 || 1 kV power lines (AC) differential mode EN/IEC 61000-4-5 || 1 kV relay output differential mode EN/IEC 61000-4-5 || 0.5 kV power lines (DC) common mode EN/IEC 61000-4-5 |
| Supply | serial)serial link supply 5 V, <200 mA |
| Ip Degree Of Protection | IP20 with protective cover in place |
| Resistance To Conducted Disturbances | 10 V 0.15 to 80 MHz EN/IEC 61000-4-6 || 3 V 0.1 to 80 MHz Marine specification (LR, ABS, DNV, GL) || 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL) |
| Analogue Input Resolution | 10 bits |
| Execution Time For 1 Kinstruction | 0.3 ms event and periodic task |
| Analogue Input Number | 2 0 to 10 V |
| Discrete Input Current | 7 mA discrete input || 5 mA fast input |
| Ambient Air Temperature For Operation | -10-55 °C horizontal installation) || -10-35 °C vertical installation) |
| Relative Humidity | 10-95 %, without condensation in operation) || 10-95 %, without condensation in storage) |
| Local Signalling | for PWR 1 LED (green) || for RUN 1 LED (green) || for module error (ERR) 1 LED (red) || for SD card access (SD) 1 LED (green) || for BAT 1 LED (red) || for SL1 1 LED (green) || for SL2 1 LED (green) || for I/O state 1 LED per channel (green) |
| Environmental Characteristic | ordinary and hazardous location |
| Immunity To Microbreaks | 10 ms |
| Maximum Number Of I/O Expansion Module | 7 (local I/O-Architecture) || 14 (remote I/O-Architecture) |
| Data Storage Equipment | 2 GB SD card optional) |
| Voltage State 1 Guaranteed | >= 15 V input |
| Discrete Input Voltage Type | DC |
| Input Impedance | 3.4 kOhm discrete input || 100 kOhm analog input || 4.9 kOhm fast input |
| Discrete I/O Number | 24 |
| Shock Resistance | 98 m/s? 11 ms |
| Network Frequency | 50/60 Hz |
| Discrete Output Voltage | 5 to 125 V DC || 5 to 250 V AC |
| Maximum Power Consumption In Va | 55 VA 100 to 240 V with max number of I/O expansion module || 32 VA 100 to 240 V without I/O expansion module |
| Control Signal Type | A/B || single phase || pulse/direction |
| Supply Voltage Limits | 85-264 V |
| Protection Type | without protection 5 A |
| Discrete Input Number | 14 , discrete input IEC 61131-2 Type 1 |
| Output Voltage Limits | 125 V DC || 277 V AC |
| Inrush Current | 40 A |
| Battery Type | BR2032 lithium non-rechargeable 4 year(s) |
| Switching Frequency | 20 switching operations/minute with maximum load |
| Maximum Size Of Object Areas | 255 %C counters || 8000 %MW memory words || 512 %M memory bits || 512 %KW constant words || 255 %TM timers |
| Absolute Accuracy Error | +/- 1 % of full scale analog input |
| Discrete Output Type | relay normally open |
| Marking | CE |
| Product Or Component Type | logic controller |
| Ambient Air Temperature For Storage | -25-70 °C |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |
Controller, 24VDC, 4.17 in. H, Compact, SCHNEIDER ELECTRIC, Mfr# TM221C24R
$438,99
Free shipping will be applied on orders over $50
Controller, Input Voltage 24V AC/DC, Output Type Relay, 2 A Amps, Number of Inputs 24, Number of Outputs 24, No Clock, 7 Segment LED Display, Depth 5.47 in, Height 4.17 in, Width 6.1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$438.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.