Item
Motion Control Coupling
Shaft Locking Type - Couplings
1 Piece Clamp
System of Measurement
Metric
Material - Couplings
Aluminum
Max. Angular Misalignment
3 Degrees
Max. Parallel Misalignment (In.)
0.015 in
Max. Temp. Range (F)
225 Degrees
Length through Bore (mm)
17.02
Length through Bore
17.02 mm
Torsional Stiffness (Deg./In.-Lbs.)
0.06
Clearance Dia. (In.)
1.25 in
Length through Bore (In.)
0.67
Max. Axial Misalignment (In.)
+/-0.01
Item - Motion Control Couplings
Motion Control Coupling
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Bore Tolerance
+0.025/-0.000 mm
Screw Material
Alloy Steel
Included Screws
(2) Hex Socket Cap Screw
Number of Locking Screws
2
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Shaft Locking Type
Clamp On
Coupling Outside Diameter
31.8 mm
Full Bearing Support Required
Yes
Length Through Bore 1
17.6 mm
Minimum Operating Temperature
-40 Degrees C
Moment of Inertia
0.000009948 kgf/m sq
Coupling Material Finish
Bright
Fastener Tightening Torque
4.6 N-m
Angular Misalignment
3 Degrees
Torsional Stiffness
1.89 N-m/Deg
Parallel Misalignment
0.38 mm
Shaft Tolerance
+0.000/-0.013 mm
Coupling Material Grade
7075
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Coupling Material
Aluminum
Screw Material Finish
Black Oxide
For Misalignment Type
Angular, Axial, Parallel
Dynamic Torque Non-Reversing
3.62 N-m
Dynamic Torque Reversing
1.81 N-m
Maximum Operating Temperature
107 Degrees C
Length Through Bore 2
17.6 mm
Country of Origin (subject to change)
United States
