| Item - Relay | Current Sensing Relay |
| Item | Current Sensor Relay |
| Coil Volts | 250VAC/DC |
| Standards | EN/IEC 60255-6 |
| Width | 35 mm |
| Input Voltage | Current Sensing Relay |
| Supply Voltage Limits | 20.4-264 V AC/DC |
| Minimum Switching Current | 10 mA 5 V DC |
| Maximum Measuring Cycle | 30 ms measurement cycle as true rms value |
| Reset Time | 1500 ms time delay |
| Measurement Error | 0.05 %/°C with temperature variation || 1 by volt over the whole range with voltage variation |
| Maximum Switching Voltage | 250 V AC/DC |
| Polarity | no DC |
| Product Or Component Type | current control relay |
| Operating Position | any position without derating |
| Housing Material | self-extinguishing plastic |
| Run-Up Delay At Power-Up | 0.3 s |
| Threshold Setting | 10...100 % |
| Maximum Power Consumption In Va | 3.5 VA AC |
| Repeat Accuracy | +/- 0.5 % input and measurement circuit || +/- 2 % time delay |
| Ambient Air Temperature For Operation | -20-50°C |
| Dielectric Test Voltage | 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1 |
| Relay Monitored Parameters | overcurrent or undercurrent detection |
| Utilisation Category | AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1 |
| Marking | CE : EMC 89/336/EEC || CE : 73/23/EEC |
| Pollution Degree | 3 IEC 60664-1 |
| [Ui] Rated Insulation Voltage | 250 V IEC 60664-1 |
| Electrical Durability | 100000 cycles |
| Non-Dissipating Shock Wave | 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5 |
| Relay Type | current control relay |
| Product Certifications | GL || UL || GOST || C-tick || CSA |
| Shock Resistance | 15 gn 11 ms IEC 60255-21-1 |
| Resistance Across Terminals | 0.005 Ohm E3-M terminals || 0.015 Ohm E2-M terminals || 0.05 Ohm E1-M terminals |
| Insulation Resistance | > 500 MOhm 500 V DC between supply and relay output IEC 60255-5 || > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 || > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 || > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 || > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 || > 1 MOhm 500 V DC between supply and measurement IEC 60664-1 |
| Electromagnetic Compatibility | emission standard for industrial environments EN/IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2 |
| Mechanical Durability | 30000000 cycles |
| Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
| Local Signalling | for power ON LED (green) || for relay ON LED (yellow) |
| Maximum Power Consumption In W | 0.6 W DC |
| Tightening Torque | 0.6-1 N.m IEC 60947-1 |
| Output Contacts | 2 C/O |
| Measurement Range | 0.15...1.5 A E1-M terminals || 0.5...5 A E2-M terminals || 1.5...15 A E3-M terminals || 150 mA...15 A current |
| Control Circuit Voltage Limits | 15 % + 10 % Un |
| Connections - Terminals | screw terminals, 1 x 0.5...1 x 4 mm? AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm? AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm? AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm? AWG 24...AWG 16) flexible with cable end |
| Maximum Switching Current | 5 A AC/DC |
| Vibration Resistance | 0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1 |
| Ip Degree Of Protection | IP20 IEC 60529 terminals) || IP30 IEC 60529 casing) |
| Contacts Type And Composition | 2 C/O |
| Contacts Material | cadmium free |
| Hysteresis | 5-50 % threshold setting |
| Measurement Accuracy | +/- 10 % of the full scale value |
| Immunity To Microbreaks | 50 ms |
| Ambient Air Temperature For Storage | -40-70°C |
| Relay Name | RM35JA |
| [Us] Rated Supply Voltage | 24...240 V AC/DC 50/60 Hz +/- 10 % |
| Relative Humidity | 95-95 % 55-55°C IEC 60068-2-30 |
| Operating Rate | <= 360 operations/hour full load |
| Time Delay Type | adjustable 1...20 s, 0 + 10 % on energisation Ti || adjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt |
| Nominal Output Current | 5A |
| Switching Capacity In Va | 1250 VA |
| Overvoltage Category | III IEC 60664-1 |
| Control Circuit Frequency | 40...70 Hz +/- 10 % |
| Time Delay | Adjustable 1 to 20 s, 0 + 10% on energisation Ti, Adjustable 0.3 to 30 s, 0 + 10% on crossing the threshold Tt |
| Rated Supply Voltage | 24 to 240 V AC/DC 50/60 Hz +/- 10% |
| Operating Voltage Tolerance | - 15% + 10% Un |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Current Relay 250V 5Amp Rm35, SCHNEIDER ELECTRIC, Mfr# RM35JA32MW
$189,99
Free shipping will be applied on orders over $50
Current Sensor Relay, Input Voltage Current Sensing Relay
9999 in stock
Must order in multiples of 1
Subtotal:
$189.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.