| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJS25 |
| Bore Dia. | 10 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 25.4 mm |
| Assembled Coupling Length | 35.4 mm |
| Size | MJS25 |
| Material | Aluminum |
| Overall Length | 35.4 mm |
| Item | Jaw Coupling Hub |
| Keyway Size | None |
| Hub Material | Aluminum |
| Hub Projection | 11.9 mm |
| Recommended Hub Gap | 0.8 mm |
| Fail Safe | Yes |
| Keyway Depth | Not Applicable |
| Hub Material Finish | Bright |
| Screw Material Finish | Black Oxide |
| System of Measurement | Metric |
| Bore Type | Round Bore |
| Maximum Operating Temperature | 82 Degrees C |
| Minimum Operating Temperature | -23 Degrees C |
| Hub Diameter | 25.4 mm |
| Keyway Width | Not Applicable |
| Full Bearing Support Required | Yes |
| Number of Locking Screws | 2 |
| Screw Material | Alloy Steel |
| Hub Material Grade | 2024 |
| Shaft Locking Type | Set Screw |
| Screw Thread Size | M4 |
| Zero Backlash | Yes |
| Maximum Speed | 8,000 RPM |
| Included Screws | (2) Set Screw |
| Bore Tolerance | +0.05/-0.00 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Bore Diameter | 10 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Outside Diameter | 25.4 mm |
| Jaw Profile | Curved |
| Coupling Overall Length | 35.3 mm |
| Weight | 0 lb |
| Length through Bore | 11.9 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 10mm, Aluminum, RULAND, Mfr# MJS25-10-A
$20,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS25, Outside Diameter 25.4 mm, Coupling Overall Length 35.3 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 10 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 25.4 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$20.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.