| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJS33 |
| Bore Dia. | 10 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 33.3 mm |
| Assembled Coupling Length | 44.3 mm |
| Overall Length | 44.3 mm |
| Material | Aluminum |
| Size | MJS33 |
| Item | Jaw Coupling Hub |
| Keyway Size | None |
| Bore Diameter | 10 mm |
| Maximum Speed | 8,000 RPM |
| Shaft Tolerance | +0.000/-0.013 mm |
| Outside Diameter | 33.3 mm |
| Hub Diameter | 33.3 mm |
| Number of Locking Screws | 2 |
| Jaw Profile | Curved |
| Hub Material Grade | 2024 |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Bore Type | Round Bore |
| System of Measurement | Metric |
| Screw Thread Size | M4 |
| Fail Safe | Yes |
| Screw Material Finish | Black Oxide |
| Maximum Operating Temperature | 82 Degrees C |
| Zero Backlash | Yes |
| Hub Projection | 15 mm |
| Hub Material Finish | Bright |
| Bore Tolerance | +0.05/-0.00 mm |
| Screw Material | Alloy Steel |
| Keyway Depth | Not Applicable |
| Keyway Width | Not Applicable |
| Coupling Overall Length | 44.5 mm |
| Length through Bore | 15 mm |
| Shaft Locking Type | Set Screw |
| Recommended Hub Gap | 0.8 mm |
| Hub Material | Aluminum |
| Weight | 0.1 lb |
| Minimum Operating Temperature | -23 Degrees C |
| Included Screws | (2) Set Screw |
| Full Bearing Support Required | Yes |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 10mm, Aluminum, RULAND, Mfr# MJS33-10-A
$30,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS33, Outside Diameter 33.3 mm, Coupling Overall Length 44.5 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 10 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 33.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$30.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.