| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJS33 |
| Bore Dia. | 12 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 33.3 mm |
| Assembled Coupling Length | 44.3 mm |
| Overall Length | 44.3 mm |
| Material | Aluminum |
| Size | MJS33 |
| Keyway Size | None |
| Item | Jaw Coupling Hub |
| Screw Thread Size | M4 |
| Zero Backlash | Yes |
| Weight | 0.1 lb |
| Maximum Speed | 8,000 RPM |
| System of Measurement | Metric |
| Bore Type | Round Bore |
| Jaw Profile | Curved |
| Screw Material Finish | Black Oxide |
| Shaft Locking Type | Set Screw |
| Shaft Tolerance | +0.000/-0.013 mm |
| Bore Diameter | 12 mm |
| Minimum Operating Temperature | -23 Degrees C |
| Full Bearing Support Required | Yes |
| Hub Diameter | 33.3 mm |
| Hub Material Grade | 2024 |
| Hub Material Finish | Bright |
| Hub Projection | 15 mm |
| Recommended Hub Gap | 0.8 mm |
| Hub Material | Aluminum |
| Coupling Overall Length | 44.5 mm |
| Keyway Depth | Not Applicable |
| Length through Bore | 15 mm |
| Keyway Width | Not Applicable |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Outside Diameter | 33.3 mm |
| Screw Material | Alloy Steel |
| Included Screws | (2) Set Screw |
| Maximum Operating Temperature | 82 Degrees C |
| Bore Tolerance | +0.05/-0.00 mm |
| Number of Locking Screws | 2 |
| Fail Safe | Yes |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 12mm, Aluminum, RULAND, Mfr# MJS33-12-A
$33,59
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS33, Outside Diameter 33.3 mm, Coupling Overall Length 44.5 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 12 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 33.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$33.59
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.