| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJSC41 |
| Bore Dia. | 15 mm |
| Keyway Size Type | 5mm x 2.3mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 41.3 mm |
| Assembled Coupling Length | 53 mm |
| Keyway Size | 5mm x 2.3mm |
| Material | Aluminum |
| Item | Jaw Coupling Hub |
| Overall Length | 53 mm |
| Size | MJSC41 |
| Bore Type | Round Bore with Keyway |
| Hub Material Grade | 2024 |
| System of Measurement | Metric |
| Screw Material Finish | Black Oxide |
| Fail Safe | Yes |
| Keyway Width | 5 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Screw Thread Size | M5 |
| Hub Material Finish | Bright |
| Zero Backlash | Yes |
| Bore Diameter | 15 mm |
| Screw Material | Alloy Steel |
| Outside Diameter | 41.3 mm |
| Full Bearing Support Required | Yes |
| Shaft Locking Type | Set Screw |
| Minimum Operating Temperature | -23 Degrees C |
| Weight | 0.1 lb |
| Jaw Profile | Curved |
| Number of Locking Screws | 2 |
| Maximum Operating Temperature | 82 Degrees C |
| Hub Material | Aluminum |
| Keyway Depth | 2.3 mm |
| Hub Diameter | 41.3 mm |
| Bore Tolerance | +0.05/-0.00 mm |
| Recommended Hub Gap | 1.3 mm |
| Coupling Overall Length | 53 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Maximum Speed | 8,000 RPM |
| Hub Projection | 18 mm |
| Included Screws | (2) Set Screw |
| Length through Bore | 18 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 15mm, Aluminum, RULAND, Mfr# MJSC41-15-A
$51,95
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS41, Outside Diameter 41.3 mm, Coupling Overall Length 53 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 2.3 mm, Keyway Width 5 mm, Bore Diameter 15 mm, Shaft Locking Type Set Screw, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M5, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 41.3 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.