| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJS51 |
| Bore Dia. | 16 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 50.8 mm |
| Assembled Coupling Length | 61 mm |
| Keyway Size | None |
| Material | Aluminum |
| Size | MJS51 |
| Item | Jaw Coupling Hub |
| Overall Length | 61 mm |
| Coupling Overall Length | 61 mm |
| Screw Material | Alloy Steel |
| Minimum Operating Temperature | -23 Degrees C |
| Screw Thread Size | M6 |
| Full Bearing Support Required | Yes |
| Hub Material Grade | 2024 |
| Outside Diameter | 50.8 mm |
| Bore Type | Round Bore |
| Included Screws | (2) Set Screw |
| System of Measurement | Metric |
| Bore Tolerance | +0.05/-0.00 mm |
| Number of Locking Screws | 2 |
| Jaw Profile | Curved |
| Shaft Locking Type | Set Screw |
| Hub Material | Aluminum |
| Recommended Hub Gap | 1.3 mm |
| Maximum Speed | 8,000 RPM |
| Zero Backlash | Yes |
| Hub Projection | 20.8 mm |
| Weight | 0.3 lb |
| Keyway Width | Not Applicable |
| Maximum Operating Temperature | 82 Degrees C |
| Shaft Tolerance | +0.000/-0.013 mm |
| Hub Material Finish | Bright |
| Bore Diameter | 16 mm |
| Hub Diameter | 50.8 mm |
| Length through Bore | 20.8 mm |
| Keyway Depth | Not Applicable |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Fail Safe | Yes |
| Screw Material Finish | Black Oxide |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 16mm, Aluminum, RULAND, Mfr# MJS51-16-A
$61,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS51, Outside Diameter 50.8 mm, Coupling Overall Length 61 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 16 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M6, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 50.8 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.