| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJSC51 |
| Bore Dia. | 16 mm |
| Keyway Size Type | 5mm x 2.3mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 50.8 mm |
| Assembled Coupling Length | 61 mm |
| Item | Jaw Coupling Hub |
| Overall Length | 61 mm |
| Material | Aluminum |
| Size | MJSC51 |
| Keyway Size | 5mm x 2.3mm |
| System of Measurement | Metric |
| Keyway Width | 5 mm |
| Hub Material Finish | Bright |
| Maximum Speed | 8,000 RPM |
| Weight | 0.3 lb |
| Screw Material | Alloy Steel |
| Full Bearing Support Required | Yes |
| Number of Locking Screws | 2 |
| Screw Material Finish | Black Oxide |
| Fail Safe | Yes |
| Shaft Tolerance | +0.000/-0.013 mm |
| Hub Material | Aluminum |
| Recommended Hub Gap | 1.3 mm |
| Bore Diameter | 16 mm |
| Zero Backlash | Yes |
| Screw Thread Size | M6 |
| Bore Tolerance | +0.05/-0.00 mm |
| Coupling Overall Length | 61 mm |
| Shaft Locking Type | Set Screw |
| Hub Diameter | 50.8 mm |
| Length through Bore | 20.8 mm |
| Included Screws | (2) Set Screw |
| Hub Material Grade | 2024 |
| Bore Type | Round Bore with Keyway |
| Keyway Depth | 2.3 mm |
| Jaw Profile | Curved |
| Minimum Operating Temperature | -23 Degrees C |
| Maximum Operating Temperature | 82 Degrees C |
| Hub Projection | 20.8 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Outside Diameter | 50.8 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 16mm, Aluminum, RULAND, Mfr# MJSC51-16-A
$62,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS51, Outside Diameter 50.8 mm, Coupling Overall Length 61 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 2.3 mm, Keyway Width 5 mm, Bore Diameter 16 mm, Shaft Locking Type Set Screw, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M6, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 50.8 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.