| Glove Hand Style | Left and Right |
| Cut Resistant | Yes |
| Application | Cold Storage, Commercial Fishing, Construction/Utilities, Outdoor Winter Use |
| ANSI/ISEA Cut Level | A5 |
| Glove Coating Coverage | Palm |
| Suggested Use Environment | Dry/Light Oil |
| Stitching Material | Dyneema(R) |
| Palm Material | Bi-Polymer, Dyneema(R), Synthetic |
| Thumb Style | Wing |
| Weight | Regular |
| Item | Coated Gloves |
| ANSI Abrasion Cycles | 4440 |
| Glove Coating Finish | Rough |
| Back Material | Acrylic, Dyneema(R) |
| Puncture Resistant | Yes |
| Cut | 3 |
| Standards | ANSI, EN388 |
| Finger Style | Full |
| Coating Finish | Textured |
| Finger Material | Dyneema(R) |
| Gauge | 13, 7 |
| Glove Length | 10 in |
| Coating Coverage | Palm/Fingers |
| Abrasion Resistant | Yes |
| Cuff | Rolled |
| Series | Ninja Therma Force |
| Coating Material | Bi Polymer |
| Knuckle Padding Material | None |
| Size | M |
| Color | Gray |
| ANSI/ISEA Abrasion Level | 4 |
| Lining | HPPE/Synthetic/Fiberglass, Acrylic Terry |
| ANSI/ISEA Puncture Level | 4 |
| ANSI/ISEA Abrasion Cycles | 4,100 |
| Insulated | Yes |
| Glove Coating Cover | Palm |
| Glove Coating Color | Black |
| Cuff Style | Knit |
| ANSI/ISEA Cut Load | 2,500 g |
| ANSI/ISEA Puncture Force | 130 N |
| Latex-Free | No |
| Touchscreen Compatible | No |
| Silicone-Free | No |
| Glove Construction | Seamless Knit |
| Anti-Static | No |
| Cut-Resistance Coverage | Full |
| Brand and Series | MCR Safety Ninja Therma Force N9690TC |
| Thickness | 13 ga |
| EN 388 Rating | 4XX4 |
| Water Resistant | Yes |
| Low-Profile Impact Protection | No |
| Waterproof | No |
| Glove Insulation Material | Acrylic |
| Includes Pull Strap | No |
| Finger Coverage | Full Finger |
| Material | Dyneema Diamond® |
| Double-Dipped | No |
| Palm Coating Material | Polyurethane/Nitrile |
| Coating Type | Dipped |
| Includes Reinforced Thumb Crotch | No |
| Color (Knit/Coating) | Gray / Black |
| Knit Material Color | Gray |
| Coating Texture | Rough |
| Temp Rating | Below 0 Degrees F |
| Minimum Temperature | -22 Degrees F |
| Knit Material | Dyneema(R) Diamond |
| Oil-Resistant | No |
| Country of Origin (subject to change) | Sri Lanka |
| Package Quantity | 1 |
Cut-Resistant Gloves, Black/Gray, M, PR, MCR SAFETY, Mfr# N9690TCM
$12,95
Free shipping will be applied on orders over $50
Coated Gloves, ANSI/ISEA Cut Level A5, Knit Material Dyneema(R) Diamond, ANSI/ISEA Abrasion Level 4, Additional Hazard Protection Cut-Resistant, Glove Insulation Material Acrylic, EN 388 Rating 4XX4, Standards ANSI/ISEA 105:2016, EN 388, EN 511 X2X, Insulated Yes, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Dipped, Glove Performance High Dexterity with Acrylic Terry Insulation, 1 Pair
9999 in stock
Must order in multiples of 1
Subtotal:
$12.95
You must be logged in to post a review.
Reviews
There are no reviews yet.