| Item | Cutting Tip |
| Gas Service | Propylene |
| Tip Size | 3 |
| Tip Type | GPP |
| Tip Series | 6290-VVCP |
| Steel Thickness | 5 in to 6 in |
| Series | 6290VVP |
| For Use With | Harris(R) Products |
| Acetylene Pressure | 4 oz to 2 psi |
| Oxygen Pressure | 100 psi |
| MAPP Gas Silver Braze | no |
| Propane Gas Silver Solder | no |
| MAPP Gas Soft Solder | no |
| Propane Gas Silver Braze | no |
| Soft Solder Tube Cap. | No |
| Size | 3 |
| MAPP Gas Silver Solder | No |
| Type | 2 Piece |
| Silver Solder Tube | no |
| Propane Gas Soft Solder | no |
| Flame Type | Heavy Preheat |
| Finish | Chrome Plated |
| Application | High Speed Machine Cutting |
| Fuel Flow Rate | 16 scfh (Propylene) |
| Maximum Cutting Speed | 5 in/min |
| Kerf Width | 0.14 in |
| Pressure Rating (Oxygen) | 10 to 30 psig (Preheat), 100 psig (Cutting) |
| Maximum Cutting Thickness | 6 in |
| Cutting Range | 5 in to 6 in |
| Oxygen Flow Rate | 40 scfh (Preheat), 425 scfh (Cutting) |
| Minimum Cutting Thickness | 5 in |
| Pressure Rating (Fuel) | 4 oz to 2 psi (Propylene) |
| For Torch Type | Machine |
| Tip Design | Two Piece |
| Compatible Fuel Type | MAPP |
| Compatible Manufacturer | Harris |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Cutting Tip, size 3, AMERICAN TORCH TIP, Mfr# 6290VVCP-3
$15,79
Free shipping will be applied on orders over $50
Cutting Tip, Compatible Fuel Type MAPP, For Torch Type Machine, Tip Series 6290-VVCP, Tip Size 3, Tip Design Two Piece, Minimum Cutting Thickness 5 in, Maximum Cutting Thickness 6 in, Compatible Manufacturer Harris, Application High Speed Machine Cutting, Finish Chrome Plated, Flame Type Heavy Preheat, Fuel Flow Rate 16 scfh (Propylene), Kerf Width 0.14 in, Maximum Cutting Speed 5 in/min, Oxygen Flow Rate 40 scfh (Preheat), 425 scfh (Cutting), Pressure Rating (Fuel) 4 oz to 2 psi (Propylene)
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.