| Property | Value |
|---|---|
| Gearmotor Type | DC Gearmotor |
| Gearmotor Voltage | 12V DC |
| Max. Torque | 222 in-lb |
| Gearmotor Shaft Type | Hollow |
| Gearmotor Shaft Orientation | Right Angle |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Nameplate RPM | 45 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Finish | Powdered Coat |
| Overall Length | 15.32 in |
| Gear Type | Hypoid |
| Input HP | 1/5 |
| Thermal Protection | None |
| Reversible Shaft Output | Yes |
| Housing Material | Steel |
| Enclosure | TENV |
| Gear Case | Die Cast Aluminum |
| Standards | CuRus |
| Motor Type | Permanent Magnet DC |
| Gear Ratio | 40:1 |
| Shaft | Hollow Output |
| Rotation | CW/CCW |
| No Load RPM | 45 RPM |
| Full Load Amps | 18.6 A |
| Lubrication | Grease |
| Gear Material | Steel |
| Mounting | All Position |
| Item | Dc Gearmotor |
| Brushes | Externally Replaceable |
| Overhung Load | 510 lb |
| RPM Range | 31 to 50 |
| Bearings | Ball |
| Seals | Lip Type |
| Shaft Orientation | Right Angle |
| Insulation Class | F |
| Max. Ambient Temp. | 40 Degrees C |
| Gearmotor Rotation | CW/CCW |
| Application | Light industrial, Light-to-Medium conveying applications, Packaging |
| Voltage | 12VDC |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Bearing Type | Ball |
| Nameplate Speed | 45 RPM |
| Output Shaft Type | Round |
| Mounting Orientation | Any Angle |
| Motor Duty Class | Intermittent |
| Full Load Current | 18.6 A |
| Overhung Load Capacity | 510 ft-lb |
| Housing Material Finish | Powder Coated |
| Maximum Ambient Temperature | 40 Degrees C |
| Output Shaft Diameter | 25 mm |
| Operating Voltage | 12V DC |
| Input Horsepower | 1/5 hp |
| No Load Speed | 50 RPM |
| Maximum Torque | 222 in-lb |
| Seal Type | Lip Type |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
DC Gearmotor, 12VDC, 45 rpm, 1/5 HP, 40:1, Bison Gear & Engineering, Mfr#: 021-725A0040
$986.99
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Right Angle, Output Shaft Type Round, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 12V DC, Motor Type Permanent Magnet DC, Nameplate Speed 45 RPM, Maximum Torque 222 in-lb, Overhung Load Capacity 510 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 40:1, Input Horsepower 1/5 hp, Application Light industrial, Light-to-Medium conveying applications, Packaging, Output Shaft Diameter 25 mm, Bearing Type Ball
9999 in stock
Subtotal:
$986.99
You must be logged in to post a review.
Reviews
There are no reviews yet.